If it's the length of a driveway, then its height is zero.If you stand it up on one end, it reaches to about 557.7 feet off the ground.
The answer is 27 Cubic meters. (3 meters long X 3 meters wide X 3 meters high = 27 cubic meters.)
139 meters
348 meters=0.348 kilometers
160 square meters.
High Impact Polistireen
I think about 10.00 meters.
Approx. 5 meters from the surface of the water.
It stands for Heritage High Roof (HHR). The design is based loosely on the 1949 Chevrolet Suburban.
HPBD could stand for High Performance Building Design. If this is not the answer, the question needs more information.
5 meters at the speed of 160kph
No. That is not high enough. Walk up a tall hill, you gain 100 meters. 10,000 meters, probably.
The simple formular of LxBxW can be used. 8x4x3=96m3
205ft is about 62.48 meters high.
Generally, a wave will start breaking when the water depth is about 1.3 times the wave height. So, in water that is 7.8 meters deep, a wave would likely start breaking around 6 meters in height.
The five distinct water masses resulting from density stratification are surface water (warm and low salinity), central water (cool and moderate salinity), intermediate water (relatively cool and high salinity), deep water (cold and high salinity), and bottom water (cold and very high salinity).
If it's the length of a driveway, then its height is zero.If you stand it up on one end, it reaches to about 557.7 feet off the ground.