get a job work hard and earn your boss's respect and you will get a pay check that will probably be $100.00 and if not just keep at it you will get there :)
300 feet in 10 seconds = 30 feet per second. 1 mile = 5280 feet. 5280 feet at 30 ft/sec = 5280/30 = 176 seconds = 2 minutes 56 seconds. Except that he will not be able to keep up that pace.
you should maintain a speed of 2.77 meter per seconds
There are 60 minutes in one hour, so multiply by 60 to get minutesThere are 60 seconds in one minute, so 60 x 60 = 3600 seconds ni one hour, so multiply by 3600 to get seconds.If you have a number of hours which has a whole number and a decimal part:keep the whole number of hours and multiply the fractional part by 60 to get the number of minutes;keep the whole number of minutes and multiply the fraction of minutes by 60 to get seconds.eg 5.338 hours = 5 hours and 0.338 x 60 = 20.28 minutes20.28 minutes = 20 minutes and 0.28 x 60 = 16.8 secondsSo 5.338 hours = 5 hours, 20 minutes, 16.8 seconds.
1 hour = 3,600 seconds10 seconds = (10 / 3,600) = 1/360 of an hour.(14 x 360) = 5,040 steps in 1 hour, if you can keep it up for a whole hour.
U put the boss in the tire I the playground in the air near the side of your console then u get your spinning torch in the inventory the put it next to the boss
When it is dark, i have to use a torch. Is that ok. O.M.G i keep loosing my torch. argh.
keep feeding him
Fins.
Yes they can. And to make sure they are authentic they are told not to wipe the soot off the torch. The carbon stain authenticates the fact the torch was lit and used in the relay.
You need to be on the boss level for some of the games like Combo Drop. When you are on a boss level then you can use one of the keep out signs to face the boss.
Your boss has to ask you to work over, it is illegal to keep you passed your scheduled hours.
use foam hand, upgrade it and keep on poking the boss.
Spinning classes and riding horses.
Gravataional force is applied by the spinning of the earth.
rudder
They try to keep the wheels from spinning.