0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
When a stop sign if there is no white line where do you stop?
Well you would simply stop before the sign, meaning that there is an imaginary stop-line that extends from any stop sign, and you must stop before you cross that line.
What word means to stop?
Halt. means stop.
Do school buses have to stop at a stop sign?
yes
How many feet should you stop before a stop sign?
Your front bumper should be on or just behind the 24" white painted stop bar on the ground. If the stop bar is missing, stop the front bumper at the location of the sign.
How to stop growing taller?
There is no way to stop growing taller. You will stop growing usually around the age of 18.
What is a Throttle stop screw?
it stops you from getting to many r.p.ms turning your engine and over heating it.
When my car start the engine start to race and it wont stop any help?
Could be that the throttle plate (in throttle body) is stuck open. Try to "free up" by sticking a screw driver into throttle body
How do you adjust the idle speed on a 1981 Chevy pickup with a 305 V8 and 4 bbl carb?
Adjust the throttle stop screw located on the side of the carb that has your throttle linkage connected to it.
How do you adjust the idle on a 5HP Briggs and stratton engine?
on the carb there is a plate that moves when you throttle up and returns to a stop screw when throttled down. This stop screw is the idle adjustment, turn it in until you reach your desired idle rpm.
Should you loosen the throttle stop screw?
I don't know because I'm the one who posted the question but at least now people will see it. =)
Does a Yamaha raptor 50 ATV have a governor and if so how do you take it off?
Raptor 50's are a youth atv. The factory has a throttle stop screw at the throttle lever. There is also changes to the throttle arm and carb slide that prevents attaining full throttle. Lastly the stock CDI box has a rev limiter.
How do you adjust idle on a 2001 gsxr 600?
step one: prop the fuel tank up to access the throttle lever assembly (left side) step two: trace your throttle cable down to where they go around the throttle lever (more like a pulley) twist the throttle, you'll see this lever rotate step three: locate the idle adjuster screw, its a small stop screw that keeps the throttle lever from turning completely to the full-close position. step four: by turning this screw in, the idle rpm should increase. sorry im no mechanic, but thi
Why won't the idle speed adjustment screw on a 1993 mercury villager change the idle speed?
Idle speed is set by the PCM and is not adjustable. The screw you are fiddling with is just the stop screw to adjust the initial throttle plate position, it should not be used to attempt to adjust the idle.
How do you stop a 91 f150 from idling at 2500 rpm when the idler screw has been adjusted the intake cleaned and the throttle cable replaced?
Possibly fix the vaccuum leak !!
Where is the idle screw on a 1993 Dodge Spirit?
the base idel screw in on the bottom of the throttle body.. there should be a cap over itWhile there is a screw, it is more properly an idle stop screw, more than an idle adjustment screw; since the idle is controlled electronically by the SMEC (Single Module Engine Control) through the AIC (or AIS) valve mounted on the Throttle body. The screw that our friend refers to, is used in the factory to crack open the butterfly or throttle plate, but it should not be further adjusted. Instead, find the cause why Idle is not between 700-900 RPM. Possible causes are a dirty AIC valve, or an sticking one; or a wiring intermittent contact at the AIC valve connector; or a cracked insulation on the engine speed sensor, or even a failing throttle position sensor. Amclaussen.
How do you stop bad idling on a ford ranger?
The bad idling may be due to a faulty Throttle Position Sensor (TPS). Have the computer scanned for trouble codes to confirm before replacing.
What does the stop motion screw do on the sewing macchine?
What does the stop motion screw do on the sewing machine
