0
Still curious? Ask our experts.
Chat with our AI personalities
Fran
Jordan
BeauAdd your answer:
Earn +20 pts
How do you write 3 8ths of an inch in numerical terms?
0.375 inches
What is nine tenths of an inch in 8ths?
7.2 / 8 or just a smidge over 7/8 (seven 8ths)
What is half of one and three eights?
1 and 3/8ths is the same as 8/8ths + 3/8ths. This is summed to 11/8ths. Half of that would be 11/16ths.
How many threads are in a 3 8ths 24 UNF tapped hole that is 32 thousandths deep?
A 3/8ths 24 bolt has 24 threads per inch (TPI), and a 32 thousandths (0.032) hole that has been completely bottom tapped for 3/8ths 24 fastener will have 24 x .032 or 0.768 threads in it. And yes, that isn't even one complete turn of the bolt before it bottoms out.
What percentage is 3 8ths?
It is: 3/8 = 37.5%
How many 8ths in a qauter inch?
There are two (2) 8ths in a quarter inch. This means that there are 8 8ths in a whole inch.
How do you write 3 8ths of an inch in numerical terms?
0.375 inches
Where is the PCV on a 1998 lesabre?
On almost every engine it is in the side of the valve cover. It is a 2 to 3 inch long plastic part that has a 3/8ths hose that connects to the intake manifold.
What is T8 stands for T8 lamps?
Fluorescent tubes are measured in 1/8ths of an inch. A T8 would be 8/8ths or one inch. Likewise a T12 would be 12/8ths or one and a half inches.
What size brake fittings 1997 Jeep Wrangler?
1/4 inch line, 3/8ths fittings.
What is nine tenths of an inch in 8ths?
7.2 / 8 or just a smidge over 7/8 (seven 8ths)
How to convert tenths to inches to fraction of inch?
If given a measurement that lists tenths of inches such as 0.3 inches, place the number in a fraction over the denominator 10. In this case, 3/10. To convert to 8ths, multiply the numerator by 8 and divide by 10 to get 2.4/8ths of an inch.
How many 8ths are in 34 inch?
There re 272 of them.
What is half of one and three eights?
1 and 3/8ths is the same as 8/8ths + 3/8ths. This is summed to 11/8ths. Half of that would be 11/16ths.
How long should you wait to gauge your ears from 0 to 00?
you should wait about 2 months or so. trust me my ears are 5/8ths of a inch
How many threads are in a 3 8ths 24 UNF tapped hole that is 32 thousandths deep?
A 3/8ths 24 bolt has 24 threads per inch (TPI), and a 32 thousandths (0.032) hole that has been completely bottom tapped for 3/8ths 24 fastener will have 24 x .032 or 0.768 threads in it. And yes, that isn't even one complete turn of the bolt before it bottoms out.
What is the fraction 3 8ths of 16?
fraction 3 8ths of 16 = 63/8 * 16 = 48/8 = 6
