Fluorescent tubes are measured in 1/8ths of an inch. A T8 would be 8/8ths or one inch. Likewise a T12 would be 12/8ths or one and a half inches.
A T12 bulb is a type of fluorescent light bulb with a diameter of 1.5 inches. It is an older and less energy-efficient version compared to newer T8 and T5 bulbs. T12 bulbs are being phased out in many regions due to their higher energy consumption.
Answer: 86.36 cmSolution:1 inch is about equal to 2.54 cm2.54 x 34 = 86.36Algebraic Steps / Dimensional Analysis Formula34 in*2.54 cm1 in=86.36 cm
There are 2.54 cm per 1 inch. That is the same as 1 inch / 2.54 cm. When we divide 1/2.54 we get .3937 inches per 1 cm. In fractional form, .3937 inches is a bit more than 3/8ths of an inch.
That is a standard target marble. 16mm is 5/8ths of one inch. A little bit smaller than a US 10 cent coin.
There are two (2) 8ths in a quarter inch. This means that there are 8 8ths in a whole inch.
Fluorescent tubes are measured in 1/8ths of an inch. A T8 would be 8/8ths or one inch. Likewise a T12 would be 12/8ths or one and a half inches.
7.2 / 8 or just a smidge over 7/8 (seven 8ths)
0.375 inches
246.15 8ths
A T12 bulb is a type of fluorescent light bulb with a diameter of 1.5 inches. It is an older and less energy-efficient version compared to newer T8 and T5 bulbs. T12 bulbs are being phased out in many regions due to their higher energy consumption.
None, but there are three quarters in 6 8ths.
34 centimeters=13.3858268 inches, since there are 2.54 centimeters in one inch.
1 inch is equal to 2.54 centimetres. Therefore, three eighths of an inch is equal to 3/8 x 2.54 = 0.9525 centimetres.
If given a measurement that lists tenths of inches such as 0.3 inches, place the number in a fraction over the denominator 10. In this case, 3/10. To convert to 8ths, multiply the numerator by 8 and divide by 10 to get 2.4/8ths of an inch.
4
2