answersLogoWhite

0

To find out how many 2x6x10 boards are needed to cover 260 square feet, first calculate the area of one board. A 2x6 board is actually 1.5 inches by 5.5 inches in nominal dimensions. Converting to square feet, one board is 1.5/12 * 5.5/12 = 0.0625 square feet. A 10-foot board has an area of 0.0625 * 10 = 0.625 square feet. To cover 260 square feet, you would need 260 / 0.625 = 416 boards.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Continue Learning about Math & Arithmetic

How many 2x6x10 do I need to cover 300 square feet?

We only need length times width to calculate area. Half a foot by 10 feet = 5 square feet. You'd need 60 of them to cover 300 square feet.


How many 1x6x16 ft T and ampG boards do I need to cover 801SF?

To determine how many 1x6x16 ft T&G boards you need to cover 801 square feet, first calculate the area covered by one board. A 1x6 board is approximately 0.5 ft wide and 16 ft long, so it covers about 8 square feet (0.5 ft x 16 ft). Dividing 801 square feet by 8 square feet per board gives you approximately 100.125 boards. Therefore, you would need 101 boards to cover the area, accounting for any waste or cuts.


The largest supercenter covers how many square feet of retail?

260,000 square feet CORRECT!


How many 2x6x16's would it take to cover 2000 square feet?

To determine how many 2x6x16 boards are needed to cover 2000 square feet, first calculate the area of one board. A 2x6 board is actually 1.5 inches by 5.5 inches in dimensions, which converts to 0.125 feet by 0.4583 feet, giving an area of about 0.0576 square feet per board. Dividing 2000 square feet by 0.0576 square feet per board results in approximately 34,722 boards. Therefore, you would need around 34,722 of these boards to cover 2000 square feet.


What is the area of the base of a fountain if the distance from the center of the fountain to the edge is 10 feet?

If the fountain is square, then the base covers 400 square feet of ground. If the fountain is circular, then the base covers 314.2 square feet of ground. (rounded)

Related Questions

How many 1x8x8 boards are needed to cover 180 square feet?

An 8 ft * 8 ft board covers 64 square feet so 3 will suffice.


How many 2x6x10 do I need to cover 300 square feet?

We only need length times width to calculate area. Half a foot by 10 feet = 5 square feet. You'd need 60 of them to cover 300 square feet.


1 yard of dirt covers how many square feet?

1 cubic yard of covers 27/depth in feet square feet.


How many 1x6x16 ft T and ampG boards do I need to cover 801SF?

To determine how many 1x6x16 ft T&G boards you need to cover 801 square feet, first calculate the area covered by one board. A 1x6 board is approximately 0.5 ft wide and 16 ft long, so it covers about 8 square feet (0.5 ft x 16 ft). Dividing 801 square feet by 8 square feet per board gives you approximately 100.125 boards. Therefore, you would need 101 boards to cover the area, accounting for any waste or cuts.


How many 16 foot x 6in boards are needed to cover 658 square feet?

To cover 658 square feet using 16 feet x 6 inch boards, we first need to convert the board dimensions to the same unit. Since 6 inches is half a foot, the boards are actually 16 feet x 0.5 feet in size. This gives a total area of 8 square feet per board. Therefore, 658 square feet would require 658 / 8 = 82.25 boards, but since we can't have a fraction of a board, you would need 83 boards to cover 658 square feet.


The largest supercenter covers how many square feet of retail?

260,000 square feet CORRECT!


1 Sq yard of dirt covers sq feet?

1 square yard of dirt covers up to 9 square feet of ground.


What is the length and width of a square that covers 871200 square feet?

933.381... square feet or about 933 feet 4 9/16 inches


How many square feet is Czech Republic?

Czech Republic covers 30,450 square miles or 848,897,280,000 square feet.


How big s Asia in square feet?

Asia covers approx 480 trillion square feet.


When a board is 1 x 8 and its how many boards do I use to cover 640 square feet?

80 boards.


How many 2x6x16's would it take to cover 2000 square feet?

To determine how many 2x6x16 boards are needed to cover 2000 square feet, first calculate the area of one board. A 2x6 board is actually 1.5 inches by 5.5 inches in dimensions, which converts to 0.125 feet by 0.4583 feet, giving an area of about 0.0576 square feet per board. Dividing 2000 square feet by 0.0576 square feet per board results in approximately 34,722 boards. Therefore, you would need around 34,722 of these boards to cover 2000 square feet.