0
What else can I help you with?
How many minutes is two thirds of an hour draw a diagram or illustration?
Oh, dude, two thirds of an hour is 40 minutes. You could draw a clock and divide it into thirds, but honestly, just trust me on this one. Who needs a diagram when you've got my expert comedic math skills?
How many amps goes into 900ma?
.9A
How many amps of electricity would it take to knock a person out?
0.0001 amps will stop your heart if you are fully grounded.
How many line can draw on surface of sphere?
you can draw infinite lines
How many envelopes can be stuffed in an hour?
how many envelope can be stuffed in an hour
How many amps needed for a 9000 btu unit at 240 volts?
9000 BTU/hour is equivalent to 2300 watts so the heater will draw 10 amps on 230 volts.
How many amps 3 pH 2 hp 240 v draw?
100 amps
How many amps will a 75KW 525v motor draw?
23
How many amps does a sound system use?
amps like.. amplifiers? it depends on how many speakers you have. or amps like.. current draw? again. depends on your power needs, your power amps... ect
How many amps does a microwave draw?
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
How many amps does an oven draw?
Amps for an oven are governed by the total wattage of the oven and what the voltage supply to the oven is.
How many amps does a 120 volt AC 8 watt led bulb draw?
It is drawing .06 amps.
How many amps does a dishwasher draw when in operation?
A dishwasher typically draws around 10-12 amps when in operation.
How many amps does and energy star refrigerator draw?
1 AMP
How many amps does a deep freezer draw on start up?
A deep freezer can draw between 6 to 8 times its running amps on start-up, depending on the model and size of the freezer. For example, if a freezer runs at 6 amps, it could draw between 36 to 48 amps when starting up.
How many amps does a 3000w inverter 240 v draw from a 12 volt system?
It would be at least 250 amps, maybe 300 amps.
How many amps does a two-bulb 32 watt 48-inch fluorescent light draw?
Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.
