yes
39.370078 inches
meterstick
1 metre!
No, a metre stick is adequate, but a 12 inch or 30 cm ruler would be handier and possibly perfect.No, a metre stick is adequate, but a 12 inch or 30 cm ruler would be handier and possibly perfect.
yes
Metre - it's a French word - and I00. "Centi-" is the metric system's prefic meaning "hundredth", so 1m = 100cm.
The average distance the meterstick has fallen would be (7.0 + 16.0 + 13.0 + 7.0 + 12.0) / 5 = 11.0 cm.
No, the center of gravity of a meterstick is not always located at the 50-cm mark. The center of gravity of an object is the point where its weight is considered to act. For a uniform meterstick, the center of gravity will indeed be at the 50-cm mark because of its uniform density distribution, but if the density distribution is not uniform, the center of gravity could be located at a different point.
100
If the original meterstick was broken into two pieces, and one piece is 54 cm long, then the other piece would be the total length of the meterstick (100 cm) minus the length of the first piece. Therefore, the length of the other piece would be 100 cm - 54 cm = 46 cm.
A standard meterstick is usually 1 meter long, which is equivalent to 100 centimeters or approximately 39.37 inches.
A typical meterstick made of wood weighs around 75-100 grams.
1 meter = 1,000 mm.
No
A yardstick is just a little longer than a meterstick.
The net torque on the system is zero because the meterstick is in equilibrium. The torque created by the 100g mass on one side is equal and opposite to the torque created by the 100g mass on the other side, preventing the meterstick from rotating.