Volume of cube = 5 cm * 5 cm * 5 cm = 125 cm3 so 125 would be needed.
The volume of a cube is calculated by cubing the length of one of its sides. In this case, the cube measures 20 inches on each edge, so the volume would be 20^3 = 8000 cubic inches.
A cube has 12 edges. With a total length of 48 units, each edge is 48 units ÷ 12 = 4 units volume = edge_length3 = (4 units)3 = 64 cubic units.
If a cube measures 5 cm on each end then the total volume of the cube would be 125 cubic cm. Assuming that the cube is actually made of the same steel, 125 x 7.8 = 975g
Each side would be 7 units.
17 units each
The volume of a cube is calculated by cubing the length of one of its sides. In this case, the cube measures 20 inches on each edge, so the volume would be 20^3 = 8000 cubic inches.
The length of each edge would have to be 5,280 feet. (1 mile)
A cube has 12 edges. With a total length of 48 units, each edge is 48 units ÷ 12 = 4 units volume = edge_length3 = (4 units)3 = 64 cubic units.
The side lengths of the cube are each 3 cm.
If a cube measures 5 cm on each end then the total volume of the cube would be 125 cubic cm. Assuming that the cube is actually made of the same steel, 125 x 7.8 = 975g
Each side would be 7 units.
17 units each
The base of a cube is always a square. All of the lengths of each side of a cube are the same, and every angle is 90 degrees.
The volume of a cube with 1 inch on each side is: 1 cubic inch.
V = 1,331 cubic feet.
It would be equal to the number of blocks in cubic inches.
Cubic millimetre literally means a millimetre cubed. I.e. the size of a cube if each of its lengths were 1 millimetre in length. However as the formula is length by width by height (3 dimensions of a rectangular cube, whatever its called), if the dimensions are 0.5mm, 1mm and 2mm, then the formula is .5x1x2=1mm3. It is still 1mm3.