The first thing you need to do is get all of your measurements into the same unit.
Your round pen has a diameter (D) of 60 ft = 720 in
which gives a radius (R) of 720 / 2 in = 360 in
and a height (H) of 4 in.
This gives the volume of your pen as Pi * R² * H = Pi * 360 in * 360 in * 4 in = 1628602 in³
1 Cubic Yard is 36 inches * 36 inches * 36 inches = 46656 in³
10 Cubic Yards is 466560 in³
You would need 1628602 / 466560 truck fulls of sand = 3.490659
1.963 cubic feet
Cubic inches = pi*r^2*L wherer = radius of rod = 1/2*diameter and L = length, both measured in inches.
In inches, measure the height and diameter of the container. Divide the diameter by 2 to get the radius. Use these data and the geometric formula for the volume of a cylinder (V = pi x r2 x h).
cylinder 18 feet diameter x 1.5 feet deep volume = 381 cubic feet
Assuming that 24' is the diameter of the pool, then the volume of the pool is 3,387,491.39 cubic inches. There are 231 cubic inches in a gallon, so the pool holds 14,664.46 gallons of water.
1.963 cubic feet
Cubic inches = pi*r^2*L wherer = radius of rod = 1/2*diameter and L = length, both measured in inches.
A 10-foot round slab at 4 inches requires 1 cubic yard.
In inches, measure the height and diameter of the container. Divide the diameter by 2 to get the radius. Use these data and the geometric formula for the volume of a cylinder (V = pi x r2 x h).
To convert cubic inches to cubic feet for a round tree, you would first calculate the volume of the tree in cubic inches using the formula for the volume of a cylinder (π * (radius)^2 * height). Then, divide the cubic inches by 1,728 (the number of cubic inches in a cubic foot) to get the volume in cubic feet.
cylinder 18 feet diameter x 1.5 feet deep volume = 381 cubic feet
About 8.5 (Pi*(6/12)^2*290)/27
Assuming that 24' is the diameter of the pool, then the volume of the pool is 3,387,491.39 cubic inches. There are 231 cubic inches in a gallon, so the pool holds 14,664.46 gallons of water.
The answer to this question will require some simple dimensional analysis and geometry. Assuming that he pool is a round above ground pool, 18 feet in diameter and 48 inches deep you first need to calculate the area of the swimming pool in square inches and then multiply by the depth in inches to get the volume in cubic inches: The pool is an 18 foot diameter circle. The diameter in inches of the 18 foot pool is 216 inches (18 feet x 12 inches / foot) The area of a circle = pi (3.1415) x radius x radius The radius = 1/2 of the diameter The area of an 18 foot diameter pool in square inches is: 3.1415 * 108 inches * 108 inches = 36643.5 square inches The volume in cubic inches of an 18 foot diameter pool is: 36643.5 square inches x 48 inches = 1758890 cubic inches. There are 231 cubic inches in one gallon so the volume of an 18 foot diameter, 48 inch deep pool is: 1758890 / 231 = 7,614 gallons If it is a square or rectangular pool simply multiply the length x the width x the average depth.
If the table is 60 inches across, the diameter is 60 inches.
302 cubic inches Auto manufactures round these figures off. Actually 5 liters = 305.11872 cubic inches
.4005 inches.