0
How many lighted candycanes will be needed to line a 16 foot driveway?
Wiki User
∙ 14y ago
I like to use one every two feet, so you will need 8.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How many square feet of carpeting are needed to carpet a 12-foot by 12-foot room?
0
Does braking distance decrease as speed increase?
No. If it did, you'd need a 5-mile driveway at your house, but a jet fighter could land on a 2-foot runway.
How any square feet of carpeting are needed to carpet a 12 foot by 12 foot room?
144
How many square feet are needed to carpet a 12 foot by 12 foot room?
144 ft2
How much dirt is needed to fill 36 sq foot box 12 inches deep?
1 foot by 36 sq feet = 36 cubic feet of dirt is needed
How can you stand a lighted Christmas arch up on a driveway?
If you are using PVC, hammer half inch rebar into the ground on either side of the driveway. A 4 foot piece hammered 2 feet into the ground will do a great job.
How much does staymat cost for driveway?
Staymatt driveway material costs slightly more that regular asphalt. Depending on area and complexity of the driveway, it was cost about 4 to 6 dollars per square foot.
What is the average installation price of a asphalt driveway per square foot in CT?
The average installation price of an asphalt driveway in CT is around $3-$5 per square foot. However, prices can vary based on factors such as the size of the driveway, site conditions, and additional services needed. It is recommended to get quotes from multiple contractors to ensure an accurate estimate for your specific project.
What is average cost for asphalt driveway overlay?
The exact cost will depend on the size of the driveway you want done. It usually averages from $2.50 to $4.00 per square foot.
How much does it cost to repave a driveway in Ohio?
It costs an average of $3.10 a square foot for asphalt. It costs on average $4.85 a square foot for concrete.
A driveway is 162 feet long and 6 wide and 4 inches deephow many cubic feet of concrete will be required for the driveway?
Multiply length times width. IF your driveway was 1 foot thick that would be the number of cubic feet of concrete. HOWEVER- it is only 4 inches thick. That is .33 ft (one third of a foot). So take your answer you got from multiplying LxW, and divide by 3. That will be the number of cubic feet of the driveway's volume.
Driveway square foot cost to handle 80000 pound load?
To determine the cost per square foot of the driveway to handle an 80,000-pound load, you would need to consider the type of material and thickness required for the driveway, as well as any necessary reinforcement. It is recommended to consult with a contractor who specializes in driveway construction to get an accurate estimate based on your specific needs and the local building codes.
Neighbor is putting up a chain link fence 2 foot over in your driveway Its his property line but hasn't maintained the driveway can he do that?
If its on his property line and there is no easement then the only thing you can do about it is flip him the bird when he drives by.
How much should it cost to pour a concrete sidewalk Memphis TN?
In Memphis, TN the cost of having a professional contractor pour concrete on a driveway averages from $5 to $9 per square foot. The addition of a sealant to preserve a driveway can cost as much as $18 per square foot in Memphis, TN.
How many square feet of carpeting are needed to carpet a 12-foot by 12-foot room?
0
How much gravel for a 0.75 foot wide and 250 feet long driveway using a depth of 14 inches?
To calculate the volume of gravel needed, first convert all measurements to the same unit. Then, use the formula: Volume = width (ft) x length (ft) x depth (ft). In this case, you would calculate: 0.75 ft x 250 ft x (14/12) ft = 218.75 cubic feet of gravel needed for the driveway.
Molding is needed for an area 10 foot x 10 foot?
If it is then find out where to get it and then get it!
