0
What else can I help you with?
How long to run 1600 meters at a pace of 10 and a half minutes per mile?
To run 1600 meters at a pace of 10 and a half minutes per mile requires 10 minutes 26.4 seconds.
Which requires more work lifting a 100-kilogram sack a vertical distance of 2 meters or lifting a 50-kilogram sack a vertical distance of 4 meters?
They are the same- weight x distance equals weight times distance.
An airman was within 20 meters of an ied blast. he was knocked to the ground and briefly felt dazedconfused?
Because he was 20 meters away from the blast, unless mission priority supersedes he requires 24hr rest and medical evaluation before considering return to duty
What is the mass of a cement block that requires a force of 200N to accelerate it at 5 meters per second squared?
F = M AM = F/A = 200/5 = 40 kg
A farmer wants to build a rectangular garden with river as one side if he has 220m of fencing materials What is the length of side of the fence perpendicular to the river to enclose the biggest area?
55 meters. This makes the length parallel to river 110 meters, total area = 55 x 110 =6050 sq meters. I did this using differential calculus. If you don't know this, you can try other combinations. Put short side equal to 50 or 60 meters and work out area, it will be less!
What is 488.33 square meters into meters?
There is no direct conversion between square meters and meters as they measure different things:square meters are a measure of area and have two dimensionsmeters are a measure of length and has only one dimensionTo convert requires losing a dimension, which requires a division by a length. For example, if the area is rectangular, then dividing its area (in square meters) by its width (in meters) will give its length (in meters).If the shape is regular, for example a square then the length and width are the same, then so finding a square root will suffice.Square metere
How do you convert 45 square meters of asphalt to tons?
The answer requires the average thickness and density of the asphalt.
What dimension is area calculate in?
Area requires a two-dimensional unit. This is often expressed as the square of something, for example, m2 (square meters), cm2 (square centimeters), etc.Area requires a two-dimensional unit. This is often expressed as the square of something, for example, m2 (square meters), cm2 (square centimeters), etc.Area requires a two-dimensional unit. This is often expressed as the square of something, for example, m2 (square meters), cm2 (square centimeters), etc.Area requires a two-dimensional unit. This is often expressed as the square of something, for example, m2 (square meters), cm2 (square centimeters), etc.
How much is 4.59 in meters?
4.59 feet equals 1.399032 meters. There is also 4.59 inches in 0.116586 meters. Knowing different conversion methods will help when measuring materials when building a structure.
At 45 mph will at take to travel 500 meters?
At 45 miles per hour, a distance of 500 meters requires about 24.8 seconds.
WHAT materials can be measured in meters?
The length of any material: cloth, room, timber, person, car, etc.
How many meters of fabric in a king size sheet?
A standard king size sheet typically requires about 10 meters of fabric. However, this may vary depending on the specific measurements and design of the sheet.
How do you say 2.17 meters?
I would say "two point one seven meters", but you could also say two and seventeen hundredths meters. The latter requires a little more careful diction; the 'th' in hundredths is important. Two point one seven meters is likely the more popular choice.
Where is the longest slackline located?
There is no location for the longest slackline, since slacklining is not a sport which requires materials other than the slackline and anchor. However, the longest slackline was achieved by Damien Jorren in June of 2010. He walked a record-breaking 306.8 meters (1,007 feet). http://slacklinevisions.wordpress.com/slackline-info-2/
How long to run 1600 meters at a pace of 10 and a half minutes per mile?
To run 1600 meters at a pace of 10 and a half minutes per mile requires 10 minutes 26.4 seconds.
An airman was within 20 meters of an ied blast?
Because he was 20 meters away from the blast, unless mission priority supersedes he requires 24hr rest and a medical evaluation before considering return to duty.
Which requires more work-lifting a 50 kgsack a vertical distance of two meters or lifting a 25kg sack a vertical distance of four meters?
Lifting a 50 kg sack a vertical distance of two meters requires more work because work is equal to force multiplied by distance. In this case, the force is greater (50 kg as opposed to 25 kg) even though the distance is shorter.
