A standard 10-foot table can typically seat 8 to 10 people comfortably, depending on the arrangement and type of seating. If using banquet chairs, you might fit 10, while with more spacious dining chairs, it may be more comfortable for 8. The exact number can vary based on personal preferences and the amount of space each person requires.
IF YOUR TABLE IS 108" LONG " TOTAL LENGHT THEN I WOULD SAY 4 THAT GIVES 24" PER PERSON, BUT IF THATS JUST ONE SIDE THEN YOU CAN SIT 10. i SAY TEN BECAUSE THE TABLE MAY BE 108" LONG BUT IT HAS TO HAVE 2 ENDS WHICH WOULD SEAT ONE AT EACH END FOR A TOTAL OF 10. If it's a round table then you can seat 5 ricky " THE STICK OUTDOORS " AND GARDENING EXTRADINARE
A 70-inch round table typically accommodates 8 to 10 people comfortably. For a more spacious setting, it can fit 8 people, while a tighter arrangement can seat up to 10. The exact number may vary depending on the size of the chairs and the amount of personal space desired.
To comfortably seat 8 to 10 people, a table should ideally be at least 72 to 96 inches long and about 36 to 48 inches wide. This allows enough space for each person to have around 24 inches of table length and provides room for dishes and utensils. A round table needs to be at least 60 inches in diameter to accommodate this number of guests. Additionally, ensuring ample legroom is important for comfort.
Yes, a 66-inch round table can comfortably accommodate 10 people, especially if the seating is arranged thoughtfully. Typically, a table of this size can seat about 8 to 10 people, allowing for enough space for each person to eat and move comfortably. However, for optimal comfort, it may be better to keep the number closer to 8 or 9, depending on the size of the chairs and the dining setup.
A standard 9-foot table can typically seat about 10 to 12 people, depending on the type of seating used. If using banquet-style chairs, you can generally fit 10 people comfortably, with 5 on each side. However, if you're using smaller chairs or allowing for more space, it might accommodate up to 12. Always consider the table's width and the need for personal space when determining seating capacity.
10 but 1 if they are fat
8 to 10. You can seat 4 on each side of the table lengthwise and you might be able to seat one more at each end for 10 total.
He with either have 38 tables with 4 people at each table, or 19 tables with 8 at each table.
You can sit 8 people at an 8 ft table. 4 on each side. Or if you use the ends you can seat 10.
For banquets, a 6 ft (72inch) round table is typically used to seat 10 people comfortably
It depends on the shape of the table. A square table about 6' on each side would easily seat 10, 5' would be possible but probably not comfortably. A round 8' diameter table would work. A banquet table 2.5 X 10 will seat 10 with 4 on each side and one on each end.
10 chairs!
Assuming each person needs about 24 inches of width, a table 30 X 72 inches can comfortably seat around 8-10 people.
10 inches from table underside to top of chair seat
For a wedding of 100 people, there should be at least 10 tables, assuming each table can seat 10 people. Usually, assume the each table can only be used around 7-8 people to avoid running out of seats.
A conference table that will hold 10 people is pretty big. This type of table would have to be at least 72 inches. For other measurements, here is a link: http://www.banquettables.pro/index.php?Itemid=112
When planning how many people you are able to seat at a round table, the following are event industry standards: 30" table=2-4 people 36" table=4-5 people 48" table=6-8 people 54" table=8-9 people 60" table=8-10 people 66" table=9-11 people 72" table=10-12 people If you'd like to be more specific, or are using nonstandard sized tables, a good rule of thumb is to allow 18-24 inches of linear space per person. Based on the number of people you are seating at the table, calculate the total amount of linear inches you'll need per table, then divide that number by Pi (3.14) to figure the diameter of the table you will need. For example, here is the calculation for the size of a round table for 10 people: 10 guests x 21 inches per guest = 210 total linear inches 210 total linear inches / 3.14 = 66.88 inches in diameter Based on this calculation, you will need a table that is at least 66.88 inches in diameter to seat 10 people, allowing 21 inches for each seat. For an accurate estimate, be sure to consider are the width of the chairs you'll be using. Metal folding chairs are typically 17-19 inches wide, while rental ballroom chairs are only 16.3 inches wide. Another consideration is the place setting you'll be using at each seat. If it is an elaborate place setting with a charger and multiple pieces of flatware, then calculate the space needed per person accordingly.