0
How many sprinklers can you run on one valve if your sprinklers have a seventeen ft spray radius?
The number of sprinklers you can run on one valve depends on the valve's flow rate and the water pressure available. For sprinklers with a 17 ft spray radius, each sprinkler typically requires around 1.5 to 2.5 gallons per minute (GPM) at optimal pressure. To determine the total number of sprinklers, divide the valve's flow rate (in GPM) by the flow rate required by each sprinkler. It's essential to consider the overall system design and pressure losses as well.
What else can I help you with?
What instrument measures the area of a circle?
A scale ie required to measure the area of a circle. We need to measure the radius of that Circle and then we can put this radius valve in below mwntioned formula & can calculate the area. A=3.14*r*r where r is radius in Cm. A is are in cm square. Hemant gautam +919099921329
What is the CV a 2 88-21124 masoneeilan valve?
data sheet of control valve
The two thin leaflets circle make up what valve?
The two thin leaflets that make up a valve refer to the bicuspid valve, also known as the mitral valve. This valve is located between the left atrium and left ventricle of the heart and ensures unidirectional blood flow. It opens to allow blood to flow from the atrium to the ventricle and closes to prevent backflow during ventricular contraction.
Where is egr valve 1997 pu show diagram?
the egr valve is underneath the air filter housing. WARNING: there are multiple things to cause the EGR system to malfunction other than the valve (BPT valve, broken vaccum hose, solenoid, clogged ports, EGR temp sensor). A good diagnosis would be worth being wrong by just replacing the valve. Trust me, I used to work for a Nissan dealer
What is a 2-in-1 valve?
A 2-in-1 valve is a type of valve that combines two functions into a single device, typically controlling the flow of fluids or gases in a system. It can serve as both a shut-off valve and a pressure relief valve, allowing for efficient management of pressure and flow. This design helps save space and simplifies installation by reducing the number of components needed in a system. 2-in-1 valves are commonly used in various applications, including plumbing, HVAC, and industrial processes.
How many sprinklers can you run on one valve if your sprinkers have a fifteen ft spray radius?
http://wiki.answers.com/Q/How_many_sprinklers_can_you_run_on_one_valve_if_your_sprinkers_have_a_fifteen_ft_spray_radius"
Should fusible link sprinklers be used in a deluge system?
No, sprinklers in a deluge system are "open"; no valve in the sprinkler, and an automatic valve turns on the water to all open sprinklers when a fire condition is detected.
How can I manually turn on sprinklers?
To manually turn on sprinklers, locate the control panel or valve box for your sprinkler system. Turn the valve to the "on" position or adjust the settings on the control panel to activate the sprinklers. Make sure to follow any specific instructions provided by the manufacturer for your sprinkler system.
How can I manually turn on the sprinklers?
To manually turn on the sprinklers, locate the control panel or valve box for your sprinkler system. Look for a manual override switch or lever that can be turned to activate the sprinklers. Follow any instructions provided by the manufacturer for proper operation.
What caused pipes to rattle when you turn on the outside sprinklers?
High water pressure could be the reason for pipes to rattle when you turn on the outside sprinklers. You may need to have a reducer valve installed.
Why are the sprinklers not turning on?
The sprinklers may not be turning on due to a malfunction in the system, such as a broken valve or a power issue. It is important to check the system for any visible damage or electrical problems to determine the cause of the issue.
Why won't the sprinklers turn on?
The sprinklers may not be turning on due to issues such as a malfunctioning timer, a broken valve, a clogged nozzle, or a disconnected water supply. It is important to check these components to determine the cause of the problem.
How can I manually turn on the sprinkler valve?
To manually turn on a sprinkler valve, locate the valve box in your yard, lift the lid, and turn the solenoid or lever on the valve to the "on" position. This will allow water to flow through the sprinkler system and activate the sprinklers.
Why won't the sprinklers turn on manually?
The sprinklers may not turn on manually due to a malfunction in the system, such as a faulty valve, wiring issue, or low water pressure. It is important to troubleshoot the system to identify and fix the specific problem causing the manual activation failure.
How can I increase water pressure for my sprinklers?
To increase water pressure for your sprinklers, you can try adjusting the pressure regulator on your irrigation system, checking for any clogs or leaks in the pipes, and ensuring that the water supply valve is fully open. Additionally, installing a booster pump or upgrading to a larger diameter water supply line can also help improve water pressure for your sprinklers.
How do you clean an EGR valve on a 2003 F250 6.0?
Spray some carburetor cleaner onto the valve cover and inside the valve itself making sure not to spray onto or into any other parts of the valve housing. Clean away the loosened gunk with a rag and wire brush and continue until the valve moves smoothly.
Can you clean the PCV valve on a 1991 Chevy Silverado Diesel 6.2 Liter or do you have to replace it with a new one?
Yes, you can clean the PCV valve. Take off the PCV valve and get a spray can of carb cleaner. Just spray into the valve and just enough to clean out any gunk that might be in there. You should hear it rattle when you shake the valve.
