To determine the square footage of a pool that holds 45,000 gallons, you first need to know the depth of the pool. For example, if the pool is 5 feet deep, the volume in cubic feet would be 45,000 gallons divided by 7.48 (the number of gallons in a cubic foot), which equals about 6,020 cubic feet. If you divide that by the depth (5 feet), the surface area would be approximately 1,204 square feet. Adjust the calculations based on the actual depth of the pool for accurate results.
There are 5280 feet in one mile. Therefore, 45000 feet is equal to 45000/5280 = 8.5227 recurring (that is, 8.52272727...) miles.
1.6042 square feet (rounded)
It depends . . . check the back of the paint can -- it should tell. If not, figure 350 to 400 square feet per gallon on smoothish surfaces and perhaps 200 square feet on roughish surfaces.
4.55 litres
45,000 feet = 8.523 miles
One square yard is equal to 9 (32) square feet. Threfore, 5000 square yards is equal to 5000 x 9 = 45000 square feet.
Answer: 45000 ' = 13.716 km
There are 5280 feet in one mile. Therefore, 45000 feet is equal to 45000/5280 = 8.5227 recurring (that is, 8.52272727...) miles.
An average gallon of latex house paint will cover 280 square feet
1.6042 square feet (rounded)
It depends . . . check the back of the paint can -- it should tell. If not, figure 350 to 400 square feet per gallon on smoothish surfaces and perhaps 200 square feet on roughish surfaces.
Square feet is a 2 dimensional unit of area. You cannot convert gallons, which is a three dimensional unit of volume to square feet. You can convert it to cubic feet using the conversion that 1 US gallon equals 0.133680556 cubic feet.
4.55 litres
45,000 feet = 8.523 miles
A gallon is a measure of volume whereas a square foot is a measure of area. So there are no gallons in a square foot and no square feet in a gallon.
Depending on the placement and thickness of the shakes, anywhere from 150 to 300 square feet per gallon.
1 foot = 0.3048 metres. So 45km = 45000 metres = 45000/0.3048 ft = 147 638 feet.