As a linear meter is a length with zero width, even with an infinite number of them they will not cover an area of 30 square meters.
To convert square feet to running meters, you first need to know the width in feet of the area you are measuring. Then, you multiply the square footage by 0.3048 to convert it to square meters. Finally, to convert square meters to running meters, you divide the square meters by the width in meters. This will give you the length in meters needed to cover the area.
The Louvre is approximately 60,600 square meters.
Skin usually covers about 2 square meters.
This question cannot be answered as it stands. Meters and square meters are different in that one is length and the other area. To answer this, you would need to specify the dimensions of the wood that you are using to cover the floor. If you are using 5cm wide strips of wood, then you would need 20m^2 / .05m = 400 linear meters of wood strips. Then add 10% for cuts,knots and mistakes.
As a linear meter is a length with zero width, even with an infinite number of them they will not cover an area of 30 square meters.
You can't convert meters to square meters.
To convert square feet to running meters, you first need to know the width in feet of the area you are measuring. Then, you multiply the square footage by 0.3048 to convert it to square meters. Finally, to convert square meters to running meters, you divide the square meters by the width in meters. This will give you the length in meters needed to cover the area.
That is impossible, because linear miles are a 'length' and square feet cover an 'area'.
You can't calculate linear footage based on square yardage alone. If you meant square footage it will cover 810 sq. ft..
The Louvre is approximately 60,600 square meters.
200 square feet = 18.58 square meters.
If a single roll of wallpaper will cover three square meters it will take 3.1 rolls to cover a wall that is 2 meters x 5 meters. You will need 10 square meters of paper to cover this size wall.
Skin usually covers about 2 square meters.
This question cannot be answered as it stands. Meters and square meters are different in that one is length and the other area. To answer this, you would need to specify the dimensions of the wood that you are using to cover the floor. If you are using 5cm wide strips of wood, then you would need 20m^2 / .05m = 400 linear meters of wood strips. Then add 10% for cuts,knots and mistakes.
The drainage basin of the Nile is about 3.3 million square meters.
32.3 square feet.