Running Pressure
a furlong
You can lift a locomotive or a house with 1 psi, if the pressure is applied over a large enough area.
around 1000 dollars for parts and then another 1-2 thousand for labor
Assuming you need a metric ton, that's 1000 kilograms. To lift that, you need a FORCE of 9800 newtons. Force is related to pressure by: pressure = force / area, so the answer to the original question would depend, over what area the force is applied.
M stands for a thousand. and CF - cubic feet. MCF - thousand cubic feet, thus MMCF - thousand of thousand cubic feet which is just million cubic feet
Running Pressure
Any air pressure is sufficient, if you have enough area with that pressure applied. Foe example, you could lift a 10000 pound truck with 10000 psi, if you have one square inch being acted on; you could do it with 1 psi, if you had 69.5 square feet being acted on.
a furlong
about 5000 thousand mm.
You can lift a locomotive or a house with 1 psi, if the pressure is applied over a large enough area.
i will hurt is all i can say
29 thousand feet
It depends on which Jeep you are talking about and how high you want to go. Anywhere from $100 for a body or spacer lift up to several thousand dollars for a long arm 6" suspension lift.
My son can lift and carry 25lbs... though he's really big for a four year old.
You would need approximately 65 cubic feet of helium to lift 1 pound. Helium provides lift because it is lighter than the surrounding air, creating buoyancy.
There are many different costs for a person to have a Minivator lift installed in a home. The cost can range anywhere from 1000 dollars to a couple thousand dollars.