0
What else can I help you with?
How much ground will 1 yard of gravel cover?
It depends how thick the gravel is being laid - at 4 inches thick, a cubic yard will cover 81 square feet.
How many bags of gravel do you need?
To determine how many bags of gravel you need, first calculate the area you plan to cover by multiplying the length and width. Then, decide on the depth of gravel you require, typically around 2-3 inches for a driveway or path. Convert these measurements into cubic feet and divide by the cubic feet per bag of gravel, which is usually around 0.5 cubic feet. This will give you the number of bags needed; always round up to account for spillage or settling.
How much gravel is needed to cover 350 square feet 2 inches deep?
Plan on about 2.2 cubic yards (2.8 tons) of gravel.
How much gravel to cover 15000 square feet 10 inches deep?
You will need about 463 cubic yards (around 594 tons) of gravel for this area.
How much gravel will it take to cover 3100 square feet at 3 inches deep?
You'll need about 28.704 cubic yards (37 tons) of gravel.
How much gravel is needed for a driveway 1780 sq ft 12 inches deep?
You will need 65.93 cubic yards or 84.6 tons of gravel.
How much does driveway gravel cost a cubic yard?
The cost of driveway gravel can vary depending on the type of gravel and where you purchase it from. On average, you can expect to pay around $30 to $50 per cubic yard for driveway gravel. It's best to check with local suppliers for specific pricing in your area.
How much gravel do you need to cover 300 square feet 4 inches thick?
You will need about 3.7 cubic yards (around 4.75 tons) of gravel.
How much gravel for a 14 feet wide and 125 feet long driveway?
If you use a depth of 3 inches, that area will be about 16.2 cubic yards (around 20.785 tons) of gravel.
How much ground will 1 yard of gravel cover?
It depends how thick the gravel is being laid - at 4 inches thick, a cubic yard will cover 81 square feet.
How do you measure gravel driveway?
First, find the total square footage of your driveway. You can find this by multiplying the length of the driveway by the width of the driveway. When you have determined the square footage, you need to decide how thick you will apply the gravel. At a depth of 1", 1 cubic yard of gravel will cover 320 square feet. So for example, if you would like to put down 3 inches of material over 1000 square feet, you would do the following. 1000 square ft./320 = 3.125 3.125*3" depth = 9.375 yards
How many bags of gravel do you need?
To determine how many bags of gravel you need, first calculate the area you plan to cover by multiplying the length and width. Then, decide on the depth of gravel you require, typically around 2-3 inches for a driveway or path. Convert these measurements into cubic feet and divide by the cubic feet per bag of gravel, which is usually around 0.5 cubic feet. This will give you the number of bags needed; always round up to account for spillage or settling.
How much gravel do you need to cover 252 sq ft?
The amount of gravel needed to cover 252 square feet depends on how thick (that is, deep) you want the gravel. If you want the gravel to be 3 inches thick... Convert the measurement to the same units. We'll use feet. 3 inches = 1/4 foot Multiply the thickness times the area to get volume in cubic measure. 1/4 feet x 252 feet = 63 cubic feet Gravel in the US is usually sold by the cubic yard, which is 27 cubic feet Thus, 63/27 = 2 1/3 cubic yards 2 1/3 cubic yards of gravel will cover 252 square feet of area to a dept of 3 inches.
How much will it cost for a 1800 square foot gravel driveway?
It depends on the depth you want the gravel to be and also how much you are charged per cubic yard. However, you will need a minimum of 2,565.5 cubic yards of gravel if you use a 4-inch depth to cover 1,800 square feet. This equates to roughly 28.5 tons of gravel.
How much gravel is needed to cover 350 square feet 2 inches deep?
Plan on about 2.2 cubic yards (2.8 tons) of gravel.
How much gravel to cover 15000 square feet 10 inches deep?
You will need about 463 cubic yards (around 594 tons) of gravel for this area.
How much gravel will it take to cover 3100 square feet at 3 inches deep?
You'll need about 28.704 cubic yards (37 tons) of gravel.
