Ohms law will tell you watts equals volts times amps: 115 x 5 = 575
The current's power factor is the true power divided by the apparent power. The Apparent Power is the volts multiplied by the amps. In this example, the ratio would be 200/253, or approximately .79.
You can't compare that. Ampere is a unit of electrical current; horse power is a unit of power.
watts = volts x amps x power factor
15625 5x5x5x5x5x5=15625
current = power/ voltage current = 3700/ 240 = 15.4 amps
The main difference between 5 amps and 10 amps is the amount of current flowing through a circuit. 10 amps is double the amount of current compared to 5 amps, which means a 10 amp circuit can handle twice as much power without overloading.
45 Watts
USB 3.1 (C) can deliver a power output of up to 100 watts (20 volts and 5 amps).
Power (in watts) is calculated by multiplying the voltage with the current. In this case, 5 amps running on 10 volts would use 50 watts of power.
The power used by the heater can be calculated using the formula: Power = Voltage x Current. In this case, the power would be 460 volts x 5 amps = 2300 watts.
No you can not. The power supply output of 1.2 amps is under sized. You would need to have a power supply of 3 amps or larger.
Amps are not directly convertible to horse power, which is a measure of power. Power is current times voltage. Therefore on a 240 v supply, 2.6 amps equals 624 watts. One horse power is 746 watts.
The power used by Pioneer brand car stereos is variable depending on the specific model of stereo. For example, Pioneer stereos use as little as 5 amps and as much as 12.
a 1.5 kVa source of electrical power has the capacity to supply 100 volts at 15 amps, 300 volts at 5 amps, or 1000 volts at 1.5 amps.
To calculate the amperage at 12 volts based on 1.5 amps at 5 volts, you can use the formula P=IV (Power = Current x Voltage). First, find the power at 5 volts (P=1.5A * 5V = 7.5 watts). Then, using P=IV at 12 volts, solve for current (7.5W = I * 12V => I = 0.625A). So, at 12 volts, 1.5 amps at 5 volts translates to approximately 0.625 amps.
The power used by a 5-amp soldering iron at 120 volts can be calculated using the formula: Power (W) = Current (A) x Voltage (V). With the given values, the power would be 600 watts (5 amps x 120 volts = 600 watts).