An 18000-gallon steel tank can weigh anywhere from 11000kg to 15000kg depending on the specific size and design of the tank. The weight of a steel tank is largely determined by its capacity wall thickness and overall dimensions. Some additional factors that can influence the weight of a steel tank are the specific gravity of the liquid it holds the number of heads and fittings and the type of coating or insulation.
The weight of an 18000-gallon steel tank can range from 11000kg to 15000kg depending on the specific factors mentioned above. Generally speaking larger tanks will weigh more and tanks with thicker walls and more intricate head and fitting designs will also weigh more.
What happened to the answer to my question?
No - kilograms are units of weight - not volume !
Kilogram is weight, not volume.
2350lbs. on average
about 4 feet
A 50-pound steel CO2 tank typically weighs around 30 pounds when empty.
The empty weight of a 100 cubic foot steel SCUBA tank is approximately 33lbs.
steel because of the sheer amount of mass in the steel it is an obvious winImproved AnswerIt depends on the tank size, but in general steel is lighter out of the water. This is because steel is stronger than aluminum and you don't need as much metal to hold the pressure. If you put a steel tank next to an aluminum you will notice the steel is a smaller size for size even though it holds the same amount of gas. The aluminum tank is larger since it needs more metal to hold the pressure and thus is heavier. But steel is also more negative in the water so you can take some weight off your weight belt too.
What happened to the answer to my question?
That will depend on the capacity of the tank and the gauge of the steel used to make it.
The weight of a stainless steel tank can vary significantly based on its design, thickness, and the specific grade of stainless steel used. However, a rough estimate for a stainless steel tank is about 8 to 10 kg per liter of capacity. Therefore, for a tank with a capacity of L liters, you might expect the weight to be approximately 8L to 10L kg. For precise calculations, it's best to refer to the manufacturer's specifications or engineering details.
Assuming the tank is made of steel, the weight of a 1000-gallon tank would be approximately 700-800 pounds. Aluminum tanks would be lighter, around 200-300 pounds, while stainless steel tanks would be heavier, around 1000-1200 pounds.
empty?
Gross Vehicle Weight 80,000lbs, legal road weight, actual fuel weight varies as vehicle weights vary between 35 and 45 thousand lbs. ie aluminum or steel tank size, engine and trans choices on tractor, aluminum or steel wheels etc etc
Gross Vehicle Weight 80,000lbs, legal road weight, actual fuel weight varies as vehicle weights vary between 35 and 45 thousand lbs. ie aluminum or steel tank size, engine and trans choices on tractor, aluminum or steel wheels etc etc
The weight of a 30,000-gallon underground steel fuel tank can vary depending on its design and thickness, but a rough estimate is around 30,000 to 40,000 pounds (approximately 13,600 to 18,100 kg). This weight includes the steel used for construction, which typically has a density of about 490 pounds per cubic foot. Additionally, the tank's weight can increase when filled with fuel, as gasoline or diesel adds about 6 to 8 pounds per gallon.
10,771.2 gallons with a weight of 89,724 pounds NOT including the tank