0
What else can I help you with?
How much gravel is needed to fill space 6 inches by 1000 square feet?
To calculate the amount of gravel needed, first convert the 6-inch depth to feet, which is 0.5 feet. Then, multiply the area (1000 square feet) by the depth (0.5 feet): 1000 sq ft × 0.5 ft = 500 cubic feet. Therefore, you will need 500 cubic feet of gravel to fill the space.
How much gravel to fill an area 10 by 5?
To determine how much gravel is needed to fill an area of 10 by 5 feet, you first calculate the area by multiplying the length and width: 10 feet × 5 feet = 50 square feet. Next, decide on the desired depth of the gravel fill (for example, 3 inches or 0.25 feet). Multiply the area by the depth to find the volume in cubic feet: 50 square feet × 0.25 feet = 12.5 cubic feet of gravel required.
How much area does 1 cubic yard of pea gravel cover at 2 inches deep?
1 (cubic yard) = 46 656 cubic inchesIf the depth is 2 inches then the area it will cover is 46656/2 square inches = 23,328 square inches. Convert 23,328 square inches to square yards23 328 (square inches) = 18 square yards
How much gravel do you need to fill 13feet by9feet by4inchs?
To calculate the amount of gravel needed, first convert the dimensions to consistent units. The area is 13 feet by 9 feet, which equals 117 square feet. The depth of 4 inches is equivalent to 1/3 of a foot. Therefore, the volume of gravel required is 117 square feet × 1/3 foot = 39 cubic feet.
How much gravel to fill 81 meters squared?
Gravel is bought in cubic quantities, or by weight. You ask "to fill" but you only give a square measure. The volume of gravel required wil depends on the depth you wish the gravel to be. To fill 81 square metres to a depth of 5 cm would require 4.05 cubic metres of material.
How much gravel is needed to cover 3000 square feet?
9.26 cubic yards for every inch of depth.
How much gravel to fill an area 10 by 5?
To determine how much gravel is needed to fill an area of 10 by 5 feet, you first calculate the area by multiplying the length and width: 10 feet × 5 feet = 50 square feet. Next, decide on the desired depth of the gravel fill (for example, 3 inches or 0.25 feet). Multiply the area by the depth to find the volume in cubic feet: 50 square feet × 0.25 feet = 12.5 cubic feet of gravel required.
How much area does 1 cubic yard of pea gravel cover at 2 inches deep?
1 (cubic yard) = 46 656 cubic inchesIf the depth is 2 inches then the area it will cover is 46656/2 square inches = 23,328 square inches. Convert 23,328 square inches to square yards23 328 (square inches) = 18 square yards
How much gravel do you need to fill 13feet by9feet by4inchs?
To calculate the amount of gravel needed, first convert the dimensions to consistent units. The area is 13 feet by 9 feet, which equals 117 square feet. The depth of 4 inches is equivalent to 1/3 of a foot. Therefore, the volume of gravel required is 117 square feet × 1/3 foot = 39 cubic feet.
How much sand do you need for 452 square feet at 2 inches deep?
To calculate the amount of sand needed, first convert the depth from inches to feet: 2 inches is about 0.167 feet. Then, multiply the area by the depth: 452 square feet × 0.167 feet = approximately 75.5 cubic feet of sand needed.
How much gravel you need to cover 150 square foot?
Depends on depth of gravel you plan to put down. For each 1 inch depth: Estimate gravel having a density of 2.7. 150 x 1/12 x 62.4 x 2.7 = 2106 pounds (slightly more than 1 ton) so if you want 3 inches of gravel you need about 3 tons of gravel
How do you measure gravel driveway?
First, find the total square footage of your driveway. You can find this by multiplying the length of the driveway by the width of the driveway. When you have determined the square footage, you need to decide how thick you will apply the gravel. At a depth of 1", 1 cubic yard of gravel will cover 320 square feet. So for example, if you would like to put down 3 inches of material over 1000 square feet, you would do the following. 1000 square ft./320 = 3.125 3.125*3" depth = 9.375 yards
How many yards of concrete needed for 576 square feet?
For 576 square feet at a depth of 4 inches, you will need 7.11 cubic yards.
How much gravel for a 0.75 foot wide and 250 feet long driveway using a depth of 14 inches?
To calculate the volume of gravel needed, first convert all measurements to the same unit. Then, use the formula: Volume = width (ft) x length (ft) x depth (ft). In this case, you would calculate: 0.75 ft x 250 ft x (14/12) ft = 218.75 cubic feet of gravel needed for the driveway.
How many bags of 1.5 cubic feet of gravel would it take to cover about 3000 square feet of area?
The volume that needs to be filled is 132ft * 1.5in = 132ft*(1.5/12)ft=132ft*0.125ft=16.5 cubic feet of gravel needed. ---- 1 cubic foot is 1,728 cubic inches (12 in x 12 in x 12 in) The area described above is 28,512 cubic inches divided by 1,728 cubic inches or 16.5 cubic feet
How much gravel to fill 81 meters squared?
Gravel is bought in cubic quantities, or by weight. You ask "to fill" but you only give a square measure. The volume of gravel required wil depends on the depth you wish the gravel to be. To fill 81 square metres to a depth of 5 cm would require 4.05 cubic metres of material.
How much peat gravel is needed for a 10x10 area?
To determine how much peat gravel is needed for a 10x10 area, you first need to decide on the desired depth of the gravel layer. For example, if you want a depth of 2 inches, you would calculate the volume: 10 feet x 10 feet x (2/12) feet = approximately 16.67 cubic feet. Since peat gravel typically weighs about 1,200 pounds per cubic yard, you would need around 0.62 cubic yards of gravel, which is roughly 1,200 pounds. Adjust the depth accordingly to calculate the required amount for different thicknesses.
