To determine how much gravel is needed to fill an area of 10 by 5 feet, you first calculate the area by multiplying the length and width: 10 feet × 5 feet = 50 square feet. Next, decide on the desired depth of the gravel fill (for example, 3 inches or 0.25 feet). Multiply the area by the depth to find the volume in cubic feet: 50 square feet × 0.25 feet = 12.5 cubic feet of gravel required.
You will need about 65.185 cubic yards (83.6 tons) of gravel for this area.
You will need about 463 cubic yards (around 594 tons) of gravel for this area.
Volume = 120/12= 10 cubic feet for each 1 inch of depth= 2 bags for each 1 inch of depth.
To determine how much peat gravel is needed for a 10x10 area, you first need to decide on the desired depth of the gravel layer. For example, if you want a depth of 2 inches, you would calculate the volume: 10 feet x 10 feet x (2/12) feet = approximately 16.67 cubic feet. Since peat gravel typically weighs about 1,200 pounds per cubic yard, you would need around 0.62 cubic yards of gravel, which is roughly 1,200 pounds. Adjust the depth accordingly to calculate the required amount for different thicknesses.
find the area of it 320 feet squared
You will need about 65.185 cubic yards (83.6 tons) of gravel for this area.
You will need about 463 cubic yards (around 594 tons) of gravel for this area.
You would need about 13 cu yards or about 15 tons.
Volume = 120/12= 10 cubic feet for each 1 inch of depth= 2 bags for each 1 inch of depth.
find the area of it 320 feet squared
1000 square feet (Length x width x hight)
Camille Gravel was born on 1915-08-10.
Evens Gravel was born on 1970-10-23.
Elphège Gravel was born on 1838-10-12.
100
A hole with two dimensions has no third dimension. → its volume is 6 ft × 10 in × 0 ft = 0 ft³ → You require NO concrete to fill a hole which is given as an area as it has NO volume.
1