0.116 pounds per cubic inch
15 cubic inches = 0.00868 cubic feet.
18 cups, 4.5 quarts. A good average to figuring out snow to water ratio is 12-1. So there 1/12 of a cubic foot of snow will be the volume of water. An ounce is 1 inch sq. 12x12 is 144 cubic inches of water. 144 divided by 8 ounces to a cup is 18 cups. There fore 4.5 quarts.
To determine the amount of sand needed to cover 115 sq feet 1 inch thick, you need to calculate the volume in cubic feet. Since 1 cubic foot is equal to 12x12x1 = 144 cubic inches, the volume of sand required is 115 sq feet * 1 inch / 144 = 0.7986 cubic feet.
i have a 1 or 2 inch crystal and i am wondering how muck it is worth
One cubic foot is equal to 1,728 cubic inches. Therefore, one cubic foot is 1,728 times larger than one cubic inch.
Inch is a length. Cubic inch is a volume. The question is wrong.
1 cubic inch = 16.4 cubic centimetres (approx).1 cubic inch = 16.4 cubic centimetres (approx).1 cubic inch = 16.4 cubic centimetres (approx).1 cubic inch = 16.4 cubic centimetres (approx).
Quite probably 1 cubic inch!
0.116 pounds per cubic inch
A cubic inch of 4130 steel weighs approximately 0.283 pounds.
For a 1990 Ford Crown Victoria : According to my Chilton's book : With engine oil filter change : ( 5 U.S. quarts , for the 5.0 liter / 302 cubic inch and the 5.8 liter / 351 cubic inch , V8 engines )
In 9000 cubic inches there are 147.5 liters of water. This is based on the formula that converts the volume of water in cubic inches to liters. 1 cubic inch is equal to 0.016 liters.
15 cubic inches = 0.00868 cubic feet.
A cubic inch of marble typically weighs around 0.31 pounds.
2 quarts
350 cubic inch does not equal any horsepower. it is a measure of the size of the engines combined pistons displacements. in general a 350 cubic inch engine will make more power than a 305 of the same year and manufacturer engine but it really depends on how the engine was designed.