0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many yards of concrete in a 30x40 slab 6 inch?
You can't express a volume of concrete in yards.
How many yard of concrete we need in 600 square ft?
It depends on how deep the concrete. 600 sq ft at 6 inch deep is 300 cu ft = 11.1 yards. 12 inch deep is 22,2 yards; 4 inch deep is 5.5 yards
How much concrete does it take to fill a 10 inch wide x 36 inch deep hole?
Depends on the length of the hole.
How many 12 inch by 12 inch concrete stepping stones will it take to fill a 342 square foot area?
342342342342
What is larger one eight inch or three fourths inch?
3/4 (three fourths)
How much a 12 inch by12 inch concrete block weigh?
Where are 12 inch concrete blocks applied?
Will twenty-two inch rims fit on a 1998 Dodge Stratus?
You have to elevate the shocks on the car!
What is smaller than 0.00000000000001054 of an inch?
That number with a three at the end in place of the four.
How much does concrete weigh per inch?
On average, concrete weighs about 12.5 pounds per square foot per inch thick. This can vary based on the type and density of the concrete mix.
Can ceramic tile be installed over quarter inch concrete backer board rather than half inch if the underlayment is a three quarter inch 7 layer flooring grade plywood?
Yes it can. That seems a very satisfactory way to do it.
How many pounds per square inch does concrete exert on a concrete form?
27 lbs
How do you write thirty thousandths of an inch?
0.030 inch; or 0.03 inch, three hundredths of an inch, to which it is equivalent. Think 30 X 1/1000; cancel a zero top and bottom to get 3/100, three hundredths (The first digit to the right of the decimal point is the tenths place, next right is the hundredths, and third right is the thousandths place. On the right side of the decimal, your number has to end in the named place, so '30' ends with its zero in the thousandths place. Thirty thousandths is 0.030. Three thousandths is 0.003 .)
What is the R-value of Normal Weight Concrete per inch of material?
Normal Weight Concrete at 150 pcf has an R value of 1.22 per inch thickness
How many yards of concrete in a 30x40 slab 6 inch?
You can't express a volume of concrete in yards.
How many 4 inch concrete blocks in a ton?
1,000
What is the concrete proportion for Concrete Hollow blocks?
If you want to know the volume of blockfill for 8 inch blocks its 120 blocks to the cubic metre of concrete
How many yards of concrete do you need for a 24' x 26' 4 inches thick?
for ,this we need to calculate the volume of concrete . volume of concrete = L x B Xh. =17 X 4 X24 . =1632 inch cube. Thus,1632 cubic inches concrete is needed for 17 inch by 24 inch by 4 inch deep .
