$1,650
You have not said what substance you are using a ton of to cover the asphalt.
four
That's 2.4691 cubic yards. (rounded)
You will need 200 cubic feet.
To calculate the square yards (SQ YDS) of asphalt at 3 inches thick, you first need to convert the thickness from inches to feet, which is 0.25 feet. The volume of asphalt in cubic feet can then be calculated by multiplying the area in square feet by the thickness in feet. Since 1 square yard equals 9 square feet, you can use this conversion to determine the total area in square yards needed based on the total volume of asphalt required. For specific calculations, you would need the total volume in cubic feet or the area to be paved.
The base or foundation can be between 6 and 10 inches thick. Over that is laid the asphalt anywhere from 1.5" to 3" in thickness. The asphalt driveway needs to be sealed at least every three years, more often in severe weather climates.
You have not said what substance you are using a ton of to cover the asphalt.
The concrete typically used for driveway construction is around 4 inches thick.
two and a quarter inches is desired for driveway for most domestic vehicles
A concrete driveway should be at least 4 inches thick to ensure durability and longevity.
Concrete driveways are no less than 3.5 inches to 4.5 inches.
four inches minimum. depending on your climate zone, and freeze / thaw. six inches deep would be the preffered. the only need to go deeper would be for large heavy duty trucks, semi trucks....
four
The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.
That's 2.4691 cubic yards. (rounded)
0.1 inch
You will need 200 cubic feet.