0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What force is needed to bend 1.5 inch square in tubing?
it depends on both the tube wall thickness and the length of the bend and how much you bend it. Otherwise you cannot determine force.
How much is the center of a 45 degree elbow?
4 inch 5d bend 45degree elbow center how much
How much does a 12 inch X 12 inch 1 inch thick piece of steel weigh per foot?
TO answer this question, you need to know the density and the volume of the piece of steel. For example, "mild steel" weighs .284 pounds per cubic inch. The volume of a 12 inch x 12 inch x 1 inch piece of steel is 12 * 12 * 1 = 144 cubic inches. .284 pounds/inch^3 * 144 inch^3 = 40.896 pounds. So each of these steel tiles will weigh about 41 pounds.
How much weight will a 1 inch diameter solid stainless steel rod 9 foot long supported on both ends hold in the middle without bending?
It will bend at any load greater than zero. It is just a question of how much. In your example the rod will bend 0.007 inches under 10 pounds, 0.07 inches under 100 pounds, etc.
How much pressure per square inch is on human foot when going down stairs?
You can't say 'pressure per square inch. It's just 'pressure', which equals force per square inch. You divide the person's weight by the area of the foot in contact with the stairs to get the answer.
How much lateral pressure can a quarter inch steel plate handle?
A quarter-inch steel plate can typically handle around 400-500 pounds of lateral pressure per square inch before yielding or deforming. However, the exact capacity can vary based on the grade of steel, the specific plate dimensions, and the nature of the load application. It is recommended to consult with a structural engineer for a precise analysis.
How much does a cubic inch of 4130 steel weigh?
A cubic inch of 4130 steel weighs approximately 0.283 pounds.
What force is needed to bend 1.5 inch square in tubing?
it depends on both the tube wall thickness and the length of the bend and how much you bend it. Otherwise you cannot determine force.
How much is the center of a 45 degree elbow?
4 inch 5d bend 45degree elbow center how much
How much steel a tire has?
28.359875618 pounds per square inch.
Is wood the strongest material in an earthquake?
No. Steel reinforced structures are best as steel is much stronger than wood but can still bend without breaking.
How much does a 12 inch X 12 inch 1 inch thick piece of steel weigh per foot?
TO answer this question, you need to know the density and the volume of the piece of steel. For example, "mild steel" weighs .284 pounds per cubic inch. The volume of a 12 inch x 12 inch x 1 inch piece of steel is 12 * 12 * 1 = 144 cubic inches. .284 pounds/inch^3 * 144 inch^3 = 40.896 pounds. So each of these steel tiles will weigh about 41 pounds.
How much weight will a 1 inch diameter solid stainless steel rod 9 foot long supported on both ends hold in the middle without bending?
It will bend at any load greater than zero. It is just a question of how much. In your example the rod will bend 0.007 inches under 10 pounds, 0.07 inches under 100 pounds, etc.
How much does a VW Beetle rim weigh?
the 16 inch steel rim is about 9.4kg
How much air pressure is on a one inch by one inch square at sea level?
the answer is one atmosphere
When using liquid nitrogen for shrinking steel by how much will it shrink per inch?
Liquid nitrogen can cause steel to shrink by approximately 0.001 inch per inch in size. The rapid cooling of the steel using liquid nitrogen causes a contraction in the material, resulting in a decrease in size.
What force is needed to bend 20 mm high tensile steel?
To know the force, you need to know how much you want to bend it; you also need to know the dimensions of the plate and how it is supported.
