answersLogoWhite

0

What else can I help you with?

Related Questions

How much cement render will you need to render 25sqm?

To determine how much cement render you need for 25 square meters, you'll generally require about 1.5 to 2 bags of cement render per square meter, depending on the thickness of the application and the texture desired. Thus, for 25 square meters, you would need approximately 37.5 to 50 bags of cement render, assuming each bag covers around 0.5 square meters at a thickness of about 10mm. It's important to check the specifications of the specific product you are using for more accurate calculations.


How much cement will you need to cover 180 square feet?

How much cement is needed to cover 192 square feet of area


How much cement do you need for 150 square feet?

5417011414


How many kilo grams of cement is required to fix 30 meters of floor tiles 25cmX25cm?

To calculate the amount of cement needed, first determine the area of one tile: 25cm x 25cm = 0.0625 square meters. For 30 meters of floor tiles, assuming a single row of tiles, you would need 30 meters x 0.25 meters (width of one tile) = 7.5 square meters. If we assume a standard cement coverage of about 1 bag (50 kg) for every 4 square meters, you would need roughly 2 bags (100 kg) of cement for 7.5 square meters. Adjustments may be needed based on specific installation methods and substrate conditions.


How many cement bag for 20mm thk plaster?

To determine the number of cement bags needed for 20mm thick plaster, first calculate the total volume of plaster required. For example, if you need to cover 1 square meter, the volume would be 0.02 cubic meters (20mm = 0.02m). Assuming a typical mix ratio of 1:6 (cement to sand), you would need about 0.033 cubic meters of cement, which is approximately one 50 kg bag of cement per 1.5 square meters of plaster at that thickness. Therefore, for 1 square meter, you would need approximately 0.67 bags of cement.


How much cement and sand to cover 15 square meters?

To cover 15 square meters with a cement-sand mixture, the amount needed depends on the thickness of the layer you plan to apply. For a standard 1 cm thick layer, you would require approximately 0.15 cubic meters of the mixture. A common ratio for a cement-sand mix is 1:3, which means for every part of cement, you would need three parts of sand. Thus, you would need about 37.5 kg of cement and 112.5 kg of sand for this coverage, assuming a density of about 1440 kg/m³ for the mixture.


How much sand and cement you need to lay 65 sqm?

To lay 65 square meters of concrete, the amount of sand and cement required depends on the thickness of the concrete layer. For a typical thickness of 10 cm, you would need approximately 0.65 cubic meters of concrete. A common mix ratio is 1 part cement to 2 parts sand to 3 parts gravel. In this case, you would need about 130 kg of cement and around 0.26 cubic meters of sand. Adjustments may be necessary based on the specific mix design and project requirements.


How much sand and cement do you need to cover 98 square meters?

I'll let you find the answer but you can go here and use this calculator which will convert units of measure as well for concrete ... http://www.concrete.com/calculators.htm


How many square meters do you need 10ftx14ft?

You need 13 square meters.


How much concrete will i need to cover 65 square meters by 1 centimeter in depth?

65 square meters times 0.01 meters (one centimeter) equals 0.65 cubic meters.


How many bags of cement is needed for 10square meters of ceramic floor tiles?

The number of bags of cement needed for 10 square meters of ceramic floor tiles depends on the thickness of the mortar bed and the type of tile. Typically, a standard tile installation requires about 3-4 kg of cement per square meter. Therefore, for 10 square meters, you would need approximately 30-40 kg of cement, which translates to about 1-2 bags, depending on the size of the bags (usually 25 kg or 50 kg). Always check specific installation guidelines for the exact requirements.


How much base coarse do you need for 100 square meters at 75 millimeters deep?

7.5 cubic meters.