Depends on what's flowing (gas or water or something else) and under how much pressure.
That will depend on viscosity, which will depend on the substance being pumped.
Two quarters of an inch are in a half inch.
# Cut the bottles in half. # Put an inch to inch and a half of gravel. # Dump 1 inch of dirt on top of the gravel. # Place 1.5 inches of garbage on top. # Use another inch of dirt. Water both bottles to get the dirt settled, then every other day water one bottle but never water the other bottle.
1/2" Or Half Inch of 50% of 1 inch
10gpm
As many as could flow through before eroding the piping to the point of no more flowing through and it simply spewing about.
Water flow rate half inch PVC pipe 65 psi?
Depends on what's flowing (gas or water or something else) and under how much pressure.
It can be but shouldn't be. If its plumbed in half inch you will have a lot of issues with pressure drops and huge drops in water pressure when two taps are opened at once.Usually 20mm 3/4 is run to the shower/s and then half inch to other fixtures
1 half of a inch
It depends on the depth of the water. Assuming the water in one inch deep, there would be about 13,577 gallons of water in the half acre.
Half of an inch is about as long as a centimeter, ten times longer than a millimeter.
That will depend on viscosity, which will depend on the substance being pumped.
half inch
Two quarters of an inch are in a half inch.
# Cut the bottles in half. # Put an inch to inch and a half of gravel. # Dump 1 inch of dirt on top of the gravel. # Place 1.5 inches of garbage on top. # Use another inch of dirt. Water both bottles to get the dirt settled, then every other day water one bottle but never water the other bottle.