It depends on how fast the water is flowing. There isn't enough information to solve this.
The flow rate of water through a 1-inch hose line can vary based on factors such as pressure and hose length. However, under typical conditions, a 1-inch hose can deliver approximately 320 gallons per minute (GPM) at 60 PSI. This can change with different pressures and hose types, so it's essential to consider specific circumstances for precise calculations.
There need not be any water at all in the hose! The capacity of the hose is 1.67 cubic feet.
1 Gallon
you need more info than that. you will need to provide the length of the hose and the inside diameter of the hose to calculate the amount of water it will hold
The amount of water leaking from a one-inch hole in a minute depends on various factors, including the water pressure and the nature of the fluid. However, under normal conditions, a rough estimate is that a one-inch hole can leak about 7 gallons of water per minute at standard water pressure. This can vary significantly based on the specific circumstances surrounding the leak.
The flow rate of water through a 1-inch hose line can vary based on factors such as pressure and hose length. However, under typical conditions, a 1-inch hose can deliver approximately 320 gallons per minute (GPM) at 60 PSI. This can change with different pressures and hose types, so it's essential to consider specific circumstances for precise calculations.
The time it takes to empty an 18,000-gallon pool using a 1.5-inch hose depends on the water flow rate, which typically averages around 10-15 gallons per minute for a hose of that size. At an average rate of 12 gallons per minute, it would take approximately 1,500 minutes, or about 25 hours, to completely empty the pool. However, factors such as hose length, elevation, and water pressure can affect this estimate.
Weight of 50ft section of 3 inch hose with water in it?
There need not be any water at all in the hose! The capacity of the hose is 1.67 cubic feet.
1.03 gallons
There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.
That's kinda gonna depend on how long the hose is. Without doing any figuresor math at all, we're pretty sure that a one-foot-long piece of 2-1/2" hose willhold more water than a 100-foot-long piece.In fact, when we do some figures, we can tell you that it'll hold one gallon of waterin every 47.1 inch length of hose.
A standard fire hose is 50 feet long. A hose this length with a 2-inch radius grants about 4.36 cubic feet. This volume holds 32 gallons of water.
1 Gallon
you need more info than that. you will need to provide the length of the hose and the inside diameter of the hose to calculate the amount of water it will hold
The water flow of a garden hose typically ranges from 5 to 10 gallons per minute (gpm), depending on factors such as the hose diameter, water pressure, and any attachments used. A standard 5/8-inch diameter hose at a typical water pressure of 40-60 psi can deliver around 8-10 gpm. However, smaller hoses or those with lower pressure may have reduced flow rates. Always check the specifications of your specific hose for the most accurate information.
Roughly 1 gallon for every 18 inches of hose.