0
That's kinda gonna depend on how long the hose is. Without doing any figures
or math at all, we're pretty sure that a one-foot-long piece of 2-1/2" hose will
hold more water than a 100-foot-long piece.
In fact, when we do some figures, we can tell you that it'll hold one gallon of water
in every 47.1 inch length of hose.
What else can I help you with?
How many gallons of water is in a 2.5 inch fire hose fifty feet long?
A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.
How many gallons of water in a half inch diameter hose fifty feet long?
Do you mean a fixed length of 5 inch pipe or are you asking to the amount of laminar flow through a 5 inch pipe? There is not enough info here to answer. Need length of pipe and what you are asking.
How many gallon of gasoline is in a 20'length of 4 hose?
A 20' length of 4-inch hose can hold approximately 0.38 gallons of gasoline per foot. Therefore, 20 feet of this hose can hold around 7.6 gallons of gasoline.
How long would it take to full a 12000 gallon pool?
The time to fill a 12000 gallon pool depends on the flow rate of the water source. For example, if the flow rate is 10 gallons per minute, it would take 1200 minutes or 20 hours to fill the pool.
What is the common terminology used in the fire department?
Common terminology used in the fire department includes "10-4" (acknowledgment), "mayday" (distress signal), "structure fire" (fire in a building), "hose line" (fire hose), and "incident commander" (person in charge at the scene).
How many gallons of water to fill a 2 inch fire hose?
A standard fire hose is 50 feet long. A hose this length with a 2-inch radius grants about 4.36 cubic feet. This volume holds 32 gallons of water.
How many gallons of water is in a 2.5 inch fire hose fifty feet long?
A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.
How much does a 100 ft section of 2.5 inch in diameter fire hose weigh with water?
That section of hose holds 25.5 gallons of water when it's full, which weighs about 213 pounds. To that, add the weight of the empty hose, which I don't know.
How does a fire hose stop a fire?
A fire hose is used to stop a fire by its ability to transfer water. The hose will deliver water from a source through a nozzle and onto the flames. We typically find a hose connected to a pump, which provides water under pressure. The hose will deliver that pressurized water to the nozzle, and a firefighter can direct the stream as needed.
How many gallons of water in a half inch diameter hose fifty feet long?
Do you mean a fixed length of 5 inch pipe or are you asking to the amount of laminar flow through a 5 inch pipe? There is not enough info here to answer. Need length of pipe and what you are asking.
How much water is in 100 feet five inch hose?
A 100-foot hose with an inside diameter of five inches can hold 102 US gallons of water.
Do chickens like the hose?
A garden hose as a means to get water, yes. A fire hose, no.
How much water volume does a 1.5 inch hose carry per foot of hose?
1.03 gallons
How many gallons of water in a 2.5 inch hose 100 feet long?
There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.
What is a fire hose used for?
Fire hose is typically utilized to fight fires. Fire hose is also used for irrigation or pumping purposes. There are also some other unique uses of fire hose including: * Used as softeners in rigging to protect slings * Watering and De-watering * Dust Suppression and Control * Landscaping, Sand Bags, Drip Hoses for Watering Plans * Pumping waters * Marina Bumpers * For Zoos for animal hammocks and climbing rope
How much water does a hose 2in dia x 1000ft Carrie in gallons?
Approx 544 Imperial gallons.
How fire pump work?
when there is a fire the fire engine pulls up and hopefully connects a hose to a fire hydrant and that brings water into the engine. The fire engine then pumps the water from the hydrant to the engine and finally to the hoses and they help pump water up to the hose to stop a fire.
