One acre-foot of silica sand typically weighs around 2,700 to 3,000 tons, depending on the sand's moisture content and compaction level. An acre-foot is equivalent to the volume of water that would cover one acre to a depth of one foot, which is approximately 43,560 cubic feet. Given that silica sand has a bulk density of about 100 to 120 pounds per cubic foot, this weight can be calculated accordingly.
To find the weight of sand in 1 acre at a depth of 10 feet, first calculate the volume. An acre is 43,560 square feet, so 1 acre at 10 feet deep has a volume of 435,600 cubic feet. Sand typically weighs about 100 pounds per cubic foot, so the total weight is approximately 43,560,000 pounds. Dividing by 2,000 gives about 21,780 tons of sand.
aprox 21.04 tons
how many tons of refrigeration need to 9,505 square foot
1.69 tons
The answer will depend on the units for 2. Whether it is 2 inches, feet or something else. Assuming you mean feet, a 12 foot x 12 foot x 2 foot area contains 288 cubic feet. Sand is usually measured in lbs. One cubic foot of sand weighs about 100 lbs (see related questions below). 288 x 100 lbs = 28800 lbs. This is 14.4 tons of sand.
To find the weight of sand in 1 acre at a depth of 10 feet, first calculate the volume. An acre is 43,560 square feet, so 1 acre at 10 feet deep has a volume of 435,600 cubic feet. Sand typically weighs about 100 pounds per cubic foot, so the total weight is approximately 43,560,000 pounds. Dividing by 2,000 gives about 21,780 tons of sand.
The noun sand is an uncountable noun, a singular form, a word for a substance. Units of sand are expressed as grains of sand, buckets of sand, tons of sand, etc. The plural form 'sands' is reserved for 'types of' or 'kinds of', for example: The sands used by the artist were black volcanic sand, silica sand, coral sand, and some green glauconite sand from France.
AnswerAn acre is 43,560 sq. ft. x 12 = 522,720 sq. in. At a depth of one inch, it's the same number of cubic inches.Water weighs 0.036127 lb/cu.in.43560*12*.036127= 18,884.30544 pounds, or 9.44215272 tonsThis is totally wrong. There is not 12 inches per square foot! There is 144 square iches in a square foot!43560*144 = 6,272,640 square inches per acre!6,272,640 cu. in. * 0.036127 lbs/cu. in. = 226611.7 lbs or 113.3 tons per inch or water on a acre!
The average yield for the period 2000 through 2009 crop years was 21.5 tons per acre, ranging from a low of 18.1 tons per acre in 2001 to a high of 25.9 tons per acre in 2008.
There is approximately 1. 35 tons in a cubic yard of fine sand.
The yield of willow per acre can vary significantly based on factors such as the species, growing conditions, and management practices. Typically, willow biomass can yield between 5 to 15 tons per acre annually. In optimal conditions, some growers may achieve even higher yields, up to 20 tons per acre. However, average yields often hover around 10 tons per acre in many regions.
To convert cubic yards of sand to tons, you can use the following formula: 1 cubic yard of sand is approximately equal to 1.35 tons. Therefore, 9800 cubic yards of sand would be approximately equal to 9800 * 1.35 = 13230 tons.
aprox 21.04 tons
To convert tons of sand to cubic meters, you need to know the density of the sand. On average, dry sand has a density of about 1.6 tons per cubic meter. Therefore, 30 tons of sand would be approximately 18.75 cubic meters (30 tons ÷ 1.6 tons/m³ = 18.75 m³). However, this value can vary based on the type of sand and its moisture content.
70
On average 3,120 lbs per acre or 1.56 tons
how many tons of refrigeration need to 9,505 square foot