25 feet is equal to 300 inches. The radius of a hole is half its diameter, which equals 4 inches. The volume of the cylinder is given by the formula v = [Pi]r2h, so the volume of your hole is 3.14 * 16 * 300 = 15080 cubic inches. There are 1728 cubic inches to the cubic foot, so you'll need about 8.75 cubic feet of concrete, which is about a third of a yard. (More exactly, that's a cubic yard, but concrete guys just say "yard.")
if the diameter 5/16 inches then you covert the 5/16 into 0.3125 inches. divide 5 by 16=0.3125 which is a little bigger than 0.3! ;)
15/64 drill bits are the best substitution for 6mm drill bits.ANS 2 -Now think a little here, - is someone who doesn't have a 6 mm drillbit likely to have a fairly rare one like 15/64. - 1/4 is a reasonable substitute.
The noun 'drills' (the plural form of the noun drill) is an abstract noun as a word for military exercises; a repetitious exercise used to teach or train a skill; a word for a concept.The noun 'drills' is a concrete noun as a word for a tool used to make holes; a word for a physical object.
a number of drill is the number that is most dived
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
18.6240 yd³
For a cut tap the correct drill size is a #17 drill, which has a diameter of .173 inches.
For all practical purposes an 8mm drill is equal to 5/16 inch.
if the diameter 5/16 inches then you covert the 5/16 into 0.3125 inches. divide 5 by 16=0.3125 which is a little bigger than 0.3! ;)
Diamond Core Drill Bits are the best for concrete.
To drill into concrete or brick you need a heavy-duty electric drill with a low speed. You will also need the right sized drill bit that is specially made for drilling into these types of materials.
7/8 diameter drill or .875
The best drill for hard concrete is one with a rotary hammer action such as a Hilti or Bosch.
A core drill is a drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Diamond core bit is commonly used in construction to create holes for pipes, manholes, and other large-diameter penetrations in concrete or stone.
A hand drill is scommonly used for holes under 1/4 in in diameterANS 2 - The diameter is simply the width of the drill bit from side to side.
better try to avoid drilling on concrete beams......!!
A good drill is important for use on concrete walls, but the bit you use can be just as necessary. A hammer drill with bit that has a carbide or diamond tip would be a good recommendation, remember that using goggles is vital because of the concrete dust.