Yes.
Wiki User
∙ 11y agoby "ppm" I assume you mean "parts per million". 30 percent means 30 per 100, and 1,000,000 (a million) divided by 100 is equal to 10,000. This is the ration between ppm and percent. 30x10,000 is equal to 300,000, so 30 percent is equal to 300,000 ppm
1 ppm is one part per million, or one millionth - percentage (which is latin for per hundred) wise, 1 ppm is .0001%
1 ppm = 1 part per million = 1 gram per million grams = 1 gram per 1000 kilograms = 1 gram per ton. So the two are equivalent and conversion is redundant.
5 grams per 10,000 liters = 5 X 10-4 grams/liter = 0.5 ppm w/v ppm stands for parts per million. w/v stands for weight to volume.
1000ppm = 1000mg per litre. this means 1g made up to a litre of solution.
1 ppm is approximately 1gram per ton
To dilute 1000 ppm to 500 ppm, you need to add an equal amount of the solution without any concentration. For example, if you have 1 mL of the 1000 ppm solution, you would need to add 1 mL of water to make it 500 ppm.
To calculate parts per million (ppm) from molecular weight, you first need to know the mass of the substance in grams per mole. Then, you can use the formula: ppm = (mass of substance in grams / total mass of mixture in grams) * 10^6. This will give you the concentration of the substance in parts per million.
by "ppm" I assume you mean "parts per million". 30 percent means 30 per 100, and 1,000,000 (a million) divided by 100 is equal to 10,000. This is the ration between ppm and percent. 30x10,000 is equal to 300,000, so 30 percent is equal to 300,000 ppm
mili .001 80 ppm (part per million) .00008 grams .00008 -> .08mg
To convert 0.5 percent to parts per million (ppm), you multiply by 10,000. So, 0.5 percent is equal to 5,000 ppm.
No, one percent is one part per 100. 1 ppm is equal to one part per 1,000,000. In other words, 1 PPM is 10,000 times smaller than 1%.
To prepare a 500 ppm (parts per million) solution of lead nitrate, you would need to dissolve 500 grams of lead nitrate in 1 million grams (1,000,000 grams) of solution. The specific weight of lead nitrate would depend on its molar mass and density. It is more common to express concentrations in terms of molarity (moles per liter) rather than ppm for making solutions.
PPM-Parts Per Million: Number of grams of solute per 1 million grams of solution. ppm=[mass of solute/mass of solution]*10 to the 6th power&PPB-Parts Per Billion: Number of grams of solute per 1 billion grams of solution.ppb=[mass of solute/mass of solution]*10 to the 9th power.Hope this helps.
In chemistry, parts per million or ppm is defined as the number of part of a solute that is in one million parts of a solution. The formula to calculate ppm is to divide the mass of the solute in grams by the combined mass of the solvent and solute also in grams. This value is multiplied by 1,000,000 ppm.
Mcg (microgram) is a measurement of weight or mass equal to one millionth of a gram, while ppm (parts per million) is a measurement of concentration expressing the amount of one substance in relation to a million units of a whole. In other words, mcg specifies the weight of a substance, while ppm indicates how much of a substance is present in a larger quantity.
ppm means mg per litre. mg/l means 100ug/dl. Therefore there are 10 x 10 micrograms per decilitre in ppm. In other words, 10ug/dl is 0.1 ppm.