This is a very silly question. This can be a US Gallon, or an Imperial Gallon. The lid can be a screw cap on a tin can or a screw opening on a plastic
Jerry can. It might also be a fuel can on a boat or a generator. The size of a bucket lid is about the size of the bucket you are talking about.
Well, considering most people would specify one of those other things if they really meant them, I'm guessing the "asker" is referring to a standard, everyday 5-gallon bucket. Of course you could have a short and fat bucket or a skinny and tall bucket, but that's not what they asked, was it? It's not a silly question, just a stupid answer. I think what you're looking for are the dimensions of the bucket. The top of a standard bucket is around 11.9" in diameter, which means about 37.4" in circumference. The lid must fit on that, so you can make calculations as such. Sound good?
First, fill up the 5 gallon bucket. Then, pour the contents in the 5 gallon bucket into the 3 gallon bucket. This leaves 2 gallons left in the 5 gallon bucket. Pour the 2 gallons into the 3rd container. Now, fill the 5 gallon bucket again and pour the full 5 gallons into the 3rd container. This gives you 7 gallons.
Volume is the measure of space. A 5 gallon bucket is roughly 1152 cubic inches.
42
5 gallons of concrete will fit.
There is not enough information
you fill the 3 gallon bucket into the 5 gallon bucket twice 2 *3 6 gallons but the 5 gallon will only overflow once it hits 5 gallons. You get the 1 gallon half in the 3 gallon bucket and dump the water out of the 5 gallon bucket. You pour the 1 gallon left from the 3 gallon bucket into the 5 gallon bucket and then refill the 3 gallon bucket and put the 3 gallons in making 4 gallons.
First, fill up the 5 gallon bucket. Then, pour the contents in the 5 gallon bucket into the 3 gallon bucket. This leaves 2 gallons left in the 5 gallon bucket. Pour the 2 gallons into the 3rd container. Now, fill the 5 gallon bucket again and pour the full 5 gallons into the 3rd container. This gives you 7 gallons.
no
Volume is the measure of space. A 5 gallon bucket is roughly 1152 cubic inches.
There are approximately 0.67 cubic feet in a 5 gallon bucket and 7.35 cubic feet in a 55 gallon drum.
A standard 5-gallon bucket can hold approximately 20,000 dimes, as each dime has a volume of about 0.00311 cubic inches. With each dime being worth 10 cents, a 5-gallon bucket of dimes would be worth $2,000 (20,000 dimes x $0.10).
11 3/4 top x 10 3/8 bottom x 14 1/2 deep in
The weight of a 5-gallon paint bucket can vary depending on the type of paint and materials used in the bucket. On average, a 5-gallon paint bucket can weigh between 40-60 pounds when full of paint.
This is a very silly question. This can be a US Gallon, or an Imperial Gallon. The lid can be a screw cap on a tin can or a screw opening on a plastic Jerry can. It might also be a fuel can on a boat or a generator. The size of a bucket lid is about the size of the bucket you are talking about. Well, considering most people would specify one of those other things if they really meant them, I'm guessing the "asker" is referring to a standard, everyday 5-gallon bucket. Of course you could have a short and fat bucket or a skinny and tall bucket, but that's not what they asked, was it? It's not a silly question, just a stupid answer. I think what you're looking for are the dimensions of the bucket. The top of a standard bucket is around 11.9" in diameter, which means about 37.4" in circumference. The lid must fit on that, so you can make calculations as such. Sound good?
# Start with empty buckets, and carry them to the well. # (Note that the larger is the 7-gallon bucket, and the smaller is the 4-gallon bucket.) # Fill the 4-gallon bucket with water to the top. # Empty all the water from the 4-gallon bucket into the 7-gallon bucket. # (Note that there is room in the 7-gallon bucket for exactly 3 more gallons.) # Fill the 4-gallon bucket again. # Pour from the 4-gallon bucket into the 7-gallon bucket all the water that will fit, spilling none. # (Note that since there was room for only 3 more gallons in the 7-gallon bucket, you now have 1 gallon left in the 4-gallon bucket.) # Dump out all the water from the 7-gallon bucket. (Pour it back into the well or onto some flowers so it's not wasted.) # Pour the 1 gallon of water that remains in the 4-gallon bucket into the empty 7-gallon bucket. # Refill the 4-gallon bucket completely. # Pour all the 4 gallons from the 4-gallon bucket into the 7-gallon bucket. # (Note that since the 7-gallon bucket had 1 gallon already and you added 4 gallons, you now have 5 gallons of water in the 7-gallon bucket!) # Bring back your 7-gallon bucket that's holding exactly 5 gallons of water. (Bring your 4-gallon bucket back too, in case you want to play again!)
yep
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.