16mm = 1,6 cm.
To find the surface area of a cylindrical ring or torus, you can use the formula A = 2πrh, where r is the average radius of the ring and h is the height or thickness of the ring. In this case, the average radius is (16mm + 10mm)/2 = 13mm and h can be any desired value. Therefore, the surface area of the cylindrical ring or torus is 2π(13mm)(h).
If the circle inscribes the square, the diameter equals the square's side length. In this case, 16mm.
It is: 16mm = 1.6cm
1.6 cm
The weights of steel rods with diameters of 8mm, 10mm, 12mm, 16mm, and 20mm will vary based on the specific material used. As an example, the weight of a 1-meter long mild steel rod with a diameter of 8mm would be approximately 0.39 kg, 0.62 kg for 10mm, 0.89 kg for 12mm, 1.58 kg for 16mm, and 2.47 kg for 20mm. These are approximate values and can vary depending on the exact composition of the steel.
give me formula for weight in kg 8mm 10mm 12mm 16mm
16mm x 14mm = 2.24 cm2 That's bigger than 1 cm2
10mm= 1 cm 16 mm- ? cm answer 16mm = 16/10 = 1.6 cm
8mm dia : 0.395 kg/m 10mm dia : 0.617 kg/m 12mm dia : 0.888 kg/m 16mm dia : 1.579 kg/m 20mm dia : 2.467 kg/m 25mm dia : 3.855 kg/m These are standard unit weights based on the density of steel @ 7850 kg/m3
1cm = 10mm. 1.6cm = 16mm.
1.6cm 10mm = 1cm 16mm = 1.6cm
1.6cm. every mm is .1 cm so 10mm is 1 cm(for future reference)
Depends on which size plug you are using. Hint, keep changing sockets until you find the one that fits. They are not metric. There are three sizes of plug in normal use, 10mm, 14mm and 18mm. (They are identified by their thread size) The socket sizes for these are 5/8" (16mm) 13/16" (21mm) and 15/16" (24mm). However, many 14mm plugs (the most common size) have 5/8 hexagons, and many 18mm plugs have 13/16 hexagons!
No. of Bars per tonne 8mm x 12m - 211 Nos. 10mm x 12m - 135 Nos. 12mm x 12m - 94 Nos. 16mm x 12m - 53 Nos. 20mm x 12m - 34 Nos. 25mm x 12m - 21 Nos. 32mm x 12m - 13 Nos.
No. of Bars per tonne 8mm x 12m - 211 Nos. 10mm x 12m - 135 Nos. 12mm x 12m - 94 Nos. 16mm x 12m - 53 Nos. 20mm x 12m - 34 Nos. 25mm x 12m - 21 Nos. 32mm x 12m - 13 Nos.
12mm bolt on the rear. Like a 16mm nut style head on the slider. Hold the head of the pin to break the bolt loose.