In terms of an oblong:
6in x 1ft x 28000ft
1ft x 1ft x 14000ft
1ft x 2ft x 7000ft
2ft x 2ft x 3500ft
20ft x 20ft x 35ft
The above it not exhaustive - any three lengths that multiply together to create 14000cu ft will work.
Other three dimensional shapes are equally possibly, eg pyramids (volume = 1/3 x base_area x height), cylinders (volume = {pi} x radius_base2 x height), as long as their volume is 14000cu ft.
Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.
The biggest number that can be rounded off to 14,000 is 13,500. When rounding to the nearest thousand, any number greater than or equal to 13,500 would round up to 14,000. Numbers below 13,500 would round down to 13,000.
Without knowing at least the height of the ceiling there is no way to know. The possiblities are endless. Even with the height it would be the wildest guess. Assuming it would be twice as long as wide. It could just as well be square. to illustrate and improve on the point, if length multiplied by width, multiplied by height, gave you the dimensions of the building, you could invent any dimensions so long as their product is 65000. Ex: A building 65 feet wide, 100 Feet long, and ten feet high would contain 65000 cubic feet.
the radius would have to be around 2.45cm.
1 Gross mass would equal 1 cubic centimeter einsteins
The units of cubic feet per minute and square feet are not directly convertible because they measure different quantities (volume and area). To convert from cubic feet to square feet, you would need more information about the shape or dimensions of the space.
Usually it would be about 48" high by 65" long
The three dimensions of a cubic-meter container are length, width, and height. Each dimension would measure 1 meter in a perfect cubic shape, meaning all sides are equal in length.
There's no such thing as a "cubic litre". The litre is already a unit that has three dimensions and describes a volume of space. A cubic litre would have nine dimensions, and no physical significance.
To find the volume of the drawer, you would multiply the three dimensions. So, 12 x 10 x 24 = 2,880 cubic inches. To convert cubic inches to cubic feet, you would divide by 1,728 (since 1 cubic foot is equal 1,728 cubic inches). Therefore, the drawer has a volume of 1.67 cubic feet.
1/100 cubic meters
$14000 is the equivalent of 11447.73 euros. This is because the ratio of dollar to euro is 1:0.82. So, $14000 multiply by 0.82 would equal to 11447.73 euros. This is based on current exchange rates and conversions may vary.
What is a Qubic litre? A litre is a measure of volume - with dimensions [L3]. A cubic litre (if that is what it is meant to be) would then be a "volume" measure in 9-dimensional space!
To convert square feet to cubic yards, you'll first need to know the height of the space. If the space is 10 feet high, then 600 square feet would be equal to 66.67 cubic yards (600 sq ft / 9 = 66.67 cubic yards).
The Pontiac Silverdome in Michigan, which was a stadium that could accommodate around 80,300 spectators, had a volume of approximately 28,000,000 cubic feet. To convert this to cubic yards, you would divide by 27 (since 1 cubic yard is equal to 27 cubic feet), resulting in roughly 1,037,037 cubic yards.
14000 millimeters is equal to 14 meters because there are 1000 millimeters in 1 meter. Therefore, to convert millimeters to meters, you would divide by 1000.
There are 10 millimeters in one centimeter. Therefore, 100 centimeters would be equal to 1000 millimeters.