There is a formula that calculates square footage for an area. This formula is: Area = Length x Width. By multiplying these two factors you convert feet into square feet.
There is no formula because the question is nonsensical. Square feet is a measure of area while linear feet is a measure of length and one cannot be converted to the other.
[(Linear feet x 12) / 16] + 1 is the formula.
To calculate the linear feet of an 18x36 pool, you need to determine the perimeter. The formula for the perimeter of a rectangle is (P = 2 \times (length + width)). For an 18x36 pool, this would be (P = 2 \times (18 + 36) = 2 \times 54 = 108) linear feet. Thus, the linear feet of the pool is 108 feet.
As stated the question has no numerical answer. There are 200 linear fee of a 1 foot wide strip, 400 linear feet of a 6-inch wide strip, 800 linear feet of a 3-inch wide strip, etc. The formula is L = S x W where L=# of linear feet, S=#of square feet, and W=the reciprocal of the strip width in feet.
There is a formula that calculates square footage for an area. This formula is: Area = Length x Width. By multiplying these two factors you convert feet into square feet.
There is no formula because the question is nonsensical. Square feet is a measure of area while linear feet is a measure of length and one cannot be converted to the other.
To determine the linear feet from square feet, you need to know the width of the area. If, for example, the width is 10 feet, you would divide 350 square feet by 10 feet, resulting in 35 linear feet. The formula is Linear Feet = Square Feet ÷ Width. Without knowing the width, you can't calculate the linear feet.
[(Linear feet x 12) / 16] + 1 is the formula.
To calculate the linear feet of an 18x36 pool, you need to determine the perimeter. The formula for the perimeter of a rectangle is (P = 2 \times (length + width)). For an 18x36 pool, this would be (P = 2 \times (18 + 36) = 2 \times 54 = 108) linear feet. Thus, the linear feet of the pool is 108 feet.
As stated the question has no numerical answer. There are 200 linear fee of a 1 foot wide strip, 400 linear feet of a 6-inch wide strip, 800 linear feet of a 3-inch wide strip, etc. The formula is L = S x W where L=# of linear feet, S=#of square feet, and W=the reciprocal of the strip width in feet.
Linear feet are the same as feet, so the answer is 133 linear feet!
There are linear feet, and square feet, but no "linear square feet".
50 feet is equal to 50 linear feet. The measurement of feet is the same as linear feet in this case.
72 feet is already linear as feet is linear so answer is 72
To calculate the linear feet of a round rug with a diameter of 7 feet, you can use the circumference formula, which is C = πd. For a 7-foot diameter, the circumference would be approximately 22 feet (using π ≈ 3.14). Therefore, there are about 22 linear feet in a 7x7 foot round rug.
Feet and linear feet are the same measurement. Therefore, 60 linear feet is equal to 60 feet.