0
What else can I help you with?
What gauge is 68 mil?
A thickness of 68 mil is equivalent to 0.068 inches. In terms of gauge, this measurement falls around 16 gauge in the standard gauge conversion for metal thickness, although variations can occur depending on the material being measured. Generally, mil is a term used primarily in the context of plastic sheeting and other materials, where 1 mil equals 1/1000 of an inch.
What are the different terms for the thickness of something?
Gauge is the term that comes to mind, such as 12 gauge (ga.) wire. With plastic bags, one might use mil, such as a 3 mil garbage bag. "Mil" indicates thousandths of an inch.
How mm in 4 mil?
1 mil = 0.0254 millimeters4 mil = 0.1016 millimeters
What is the difference between Mil and Gauge thickness in pool liners?
See this link: http://www.backyardcitypools.com/vinyl-pool-liners/Mil-Vs-Gauge.htm
What is 4 mil thick in inches?
A 4 mil thickness is four thousandths (0.004) of an inch.
What is ratio of gauge to mil in plastic thickness?
The ratio of gauge to mil in plastic thickness is 1 gauge = 0.1 mil. This means that for every 1 gauge increase, the thickness increases by 0.1 mils.
What is larger a 20 gauge or a 22 gauge?
Convert gauge to mil
When measuring vinyl thickness are Gauge and Mil the same?
no
Which is thicker 4 mil or 6 mil?
6 mil is thicker than 4 mil.
Is 4 mil thinner then 10 mil?
yes, 4 mil = 4 thou, 10 mil = 10 thou
What are the different terms for the thickness of something?
Gauge is the term that comes to mind, such as 12 gauge (ga.) wire. With plastic bags, one might use mil, such as a 3 mil garbage bag. "Mil" indicates thousandths of an inch.
Which is thicker 2 mil or 4 mil?
4
What is the mil for 1000 gauge thick polyethylene sheet?
0.25
What is the difference in gauge and mil when it comes to above ground swimming pool liners?
Gauge and mil refer to the thickness of the liner. To find the thickness when listed by gauge ask for the type of material and check for the converted value ( ie a 10 gauge liner may equate to perhaps a 0.14 inch thickness material , 8 gauge may be 0.12 inches etc ) The mil value usually refers to a millimeter thickness (ie 15 mil should be thicker than a 10 mil ) >KEEP IN MIND THAT THE MIL NUMBER IS NOT IN INCHES , so make sure what the mil value is given in millimeters or inches then you can compare the different thicknesses. If the pool dealer doesnt know the difference you may want to find another dealer
Whats thicker 4 or 3 mil?
The 1 Mil is equivalent to 0.001 inch. The higher the mil the thicker that product would be. So, 4 mil is thicker than 3 mil.
How mm in 4 mil?
1 mil = 0.0254 millimeters4 mil = 0.1016 millimeters
What is the difference between Mil and Gauge thickness in pool liners?
See this link: http://www.backyardcitypools.com/vinyl-pool-liners/Mil-Vs-Gauge.htm
