0
Divide each measurement in millimeters by 25.4 to convert it into inches.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How many inches does 75mm equal?
75 mm = 2.953 inchesDirect Conversion Formula75mm*1 in25.4 mm=2.952755906in
How much is 75mm x 55mm in inches?
It is about: 3 by 2.2 in inches
How big is 80mm x 75mm in inches?
About 3 1/4" x 3"
75mm is how long in inches?
2.953 in. Direct Conversion Formula 75 mm* 1 in 25.4 mm = 2.952755906 in
75mm equals how many cm?
75mm = 7.5cm
30 cm is equal to how many mm?
About 1.2 inches. 30mm=3cm
How many inches does 75mm equal?
75 mm = 2.953 inchesDirect Conversion Formula75mm*1 in25.4 mm=2.952755906in
What does 75mm convert to inches?
75 millimeters is 2.95 inches.
How much is 75mm x 55mm in inches?
It is about: 3 by 2.2 in inches
What is Modular brick advantage of modular brick?
Modular bricks are simple bricks of dimensions 200mm x 100mm x 100mm. Whereas conventional bricks are hard moulded bricks of dimensions 230mm x 115mm x 75mm.
How much is 75mm of rain?
7,5 cm or 2.5 inches
How big is 80mm x 75mm in inches?
About 3 1/4" x 3"
75mm is how long in inches?
2.953 in. Direct Conversion Formula 75 mm* 1 in 25.4 mm = 2.952755906 in
75mm equals how many cm?
75mm = 7.5cm
Is 3 inch or 4 inch better for sewer lines?
4inch or 100mm PVC sewer lines are the best way to go. as amater af fact if you are in Australia they are the legal way to go. 3" or 75mm is only used for stormwater pipes from the gutters.
How tall is 6'3 ft in m?
About 1.93 - by mental arithmetic! The conversion in 25.4mm = 1 inch. (1000mm = 1m) but I used the close approximation that 1m = 39 inches, and 75mm = 3 inches.
Dimensions of flat screen TV mount?
Flat Display Mounting Interface (FDMI) is a standard for mounting flat panel monitors and TVs. This is correctly known as FDMI, but more often referred to as "VESA mount". The interface is implemented on most modern flat-panel monitors and TVs, but not all.Sub-Standards * MIS-D 75 = Mounting holes are in a 75mm x 75mm pattern. * MIS-D 100 = Mounting holes are in a 100mm x 100mm pattern. * MIS-E = Mounting holes are in a 200mm x 100mm pattern. * MIS-F = Multiple holes are spaced so that mounting points may be at: ** 200mm x 200mm ** 400mm x 400mm ** 600mm x 200mm ** 600mm x 400mm ** 800mm x 400mm
