3.57 mm (USG)
.318 http://www.offroaders.com/tech/steel-gauge-thickness.htm
.953 mm (USG)
A diameter of 204.3 mils corresponds to a gauge size of approximately 10 gauge when referring to wire or metal thickness. In the context of sheet metal, it is important to note that gauge measurements can vary based on the material being used. For steel, 10 gauge has a thickness of about 0.1345 inches (3.4 mm), while for aluminum, it would be slightly thicker. Always refer to specific gauge charts for precise conversions based on the material type.
Probably 19 gauge, which is 1.067 mm
4.37 mm
10 gauge: 3.57 mm11 gauge: 3.18 mm
19 gauge steel is 1.11 mm thick and 20 gauge is .953 mm thick.
1.27 mm
0.1406 inches or 3.57 mm (USG).
12 gauge is thicker than 14 gauge.
1.27 mm (USG)
STANDARD STEEL .9119 MM. GALV.STEEL 1.0058
.318 http://www.offroaders.com/tech/steel-gauge-thickness.htm
what is 9gauge in mm thickness
In Imperial standard (swg), 16 g is 0.064" (1.63mm) thick.
.953 mm (USG)
The thickness of 16 gauge steel in US standards is .0625 inches or 1.59 mm and according to UK standards is .065 inches or 1.651 mm.