Q: What is 24 inches on center?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

1 inch by 24 inches equals 24 square inches 10 inches by 2.4 inches equals 24 square inches 100 inches by 0.24 inches equals 24 square inches 1000 inches by 0.024 inches equals 24 square inches also: 2 inches by 12 inches equals 24 square inches 2.5 inches by 9.6 inches equals 24 square inches 3 inches by 8 inches equals 24 square inches 3.2 inches by 7.5 inches equals 24 square inches 4 inches by 6 inches equals 24 square inches This list could be very long.

There are 24 inches in 24 inches. Perhaps you are asking how many centimetres there are in 24 inches. In which case, there are 2.54 centimetres in one inch. 24 inches is equal to 24 x 2.54 = 60.96 centimetres.

24 inches*50yards = 24 inches * 50*3*12 inches = 24 inches * 1800 inches = 43 200 square inches.

There are 12 inches in one foot so 24 inches is equal to two feet.

The perimeter is 24 inches. Each side is 6 inches. (8 times the length of one side) minus (24 inches) = 48 - 24 = 24 inches

Related questions

It means you center the stud on the measurment. Ie.. 24 inches on center means the center of the studs is 24 inches apart (from center to center)

According to their website, seats are 24 inches wide.

1 inch by 24 inches equals 24 square inches 10 inches by 2.4 inches equals 24 square inches 100 inches by 0.24 inches equals 24 square inches 1000 inches by 0.024 inches equals 24 square inches also: 2 inches by 12 inches equals 24 square inches 2.5 inches by 9.6 inches equals 24 square inches 3 inches by 8 inches equals 24 square inches 3.2 inches by 7.5 inches equals 24 square inches 4 inches by 6 inches equals 24 square inches This list could be very long.

There are 24 inches in 24 inches. Perhaps you are asking how many centimetres there are in 24 inches. In which case, there are 2.54 centimetres in one inch. 24 inches is equal to 24 x 2.54 = 60.96 centimetres.

In MLB, the pitching rubber is 24 inches long and 6 inches wide.

24 inches

24 inches*50yards = 24 inches * 50*3*12 inches = 24 inches * 1800 inches = 43 200 square inches.

To calculate whether the lift can handle a specific load, you need to know the weight of the load and the load center. If the total weight of the load is less than or equal to 6000 lbs and the load center is 24 inches or less, then the lift should be able to handle it. If the total weight exceeds 6000 lbs or the load center is greater than 24 inches, the lift may not be able to lift the load safely.

Multiply the number of inches by 25.4 to get millimeters, or by 0.0254 to get meters.

24

576 = 24²

There are approximately 9.45 inches in 24 centimeters.