0
Add your answer:
Earn +20 pts
What is 3 to the power of -3?
Using "^" for powers. By the way negative powers are defined, 3^(-3) is the same as 1 / 3^3.
Another way to write n divided into 3?
"n divided into 3" = 3/n
What does 6 multiplied by 3 and one third equal?
You could do it this way. 3 * 6 = 18 ========== 6 * 1/3 = 2 2 + 18 = 20 ----------the answer Or, this way. Change 3 and 1/3 to an improper fraction. (3*3+1)/3 = 10/3 so, 6 * 10/3 = 60/3 which is, 20 ----
What fraction shows another way to write 3.75?
it is 3 3/4
Why is 3 exactly divisible by 621?
It is not. 621 is divisible by 3, not the other way round.
How do you fix a Faulty main stopcock?
Depending what is wrong with it and what type of main stopcock you have, it may need to be serviced or replaced.
What is the function of the stopcock in Bunsen burner?
The stopcock on a Bunsen burner is used to control the airflow into the burner. By adjusting the stopcock, you can regulate the amount of oxygen that reaches the flame, which allows you to control the flame size and temperature.
What is a 3 way Extension line How to care for 3 way extension line?
3-Way Extension line is employed with any of the varied infusion or transfusion apparatus which permit for connection with any medical equipment, in order to improve the ease of use. 3 way extension line also provides an alternative channel for the introduction of medication to the patient. How to care for a 3 way extension line? • Confirm the positioning of the cock/bar when using a three-way stopcock. • When removing an IV drip tube from a three-way stopcock, make sure not to accidentally remove the plug/valve. • If it is necessary to connect several three-way stopcocks together, be cautious about loosening and breaking of the joint due to being pinched or pulled by the body, etc. • Regularly check that there is no loosening and/or shifting of the joint or fluid leakage, etc.
How do you clean a burette with stopcock stuck in it?
To clean a burette with a stuck stopcock, try soaking the burette in warm water to loosen any residue or buildup. If the stopcock is still stuck, you can try applying a lubricant such as silicone grease around the stopcock and gently tapping it to help loosen it. If these methods do not work, consider seeking help from a professional or replacing the stopcock.
How do you freeze the main water pipe to change the valve?
It is more normal to shut off the water supply at the suppliers stopcock (at the edge of your property near the road) when you need to do this. If you can not find the main stopcock to do this, contact your supplier. If you must resort to freezing the mains before your stopcock, you need to get a qualified plumber to do this for you.
How a buret is filled up?
To fill a buret, close the stopcock at the bottom, pour the solution into the top of the buret, open the stopcock slightly to allow air bubbles to escape, and then close the stopcock once the solution reaches the zero mark on the scale. Adjust the meniscus by gently tapping the buret if needed.
What is the function of straight stopcock burette?
A straight stopcock burette is used in laboratory settings to accurately measure and dispense liquids. The burette has a stopcock at the bottom that can be opened or closed to control the flow of liquid being dispensed. This design allows for precise volume measurements and controlled dispensing of liquids during experiments.
Stopcock, Plastic Stopper, can react the sulphuric acid. is it working or not?
uekjfad,smnhgfvjx
What is stopcock?
An externally operated valve regulating the flow of a liquid inside a pipe.
How do you unblock a stopcock that is seized up?
If your stopcock on your car's radiator is seized you will probably damage it and ruin the radiator if you try to force it. Leave it alone and drain the water through the lower radiator hose. There is little to gain and a lot to risk in trying to get it to work.
What is another word for faucets?
Spout, spigot, nozzle, outlet, stopcock, valve, tap
What is a buret?
A buret is a glass tube with fine gradations and a stopcock at the bottom, used in laboratory procedures.
