That doesn't compute.
You cannot. Bar is a measure of pressure whereas m3 per minute is a measure of flow rate. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
Absolute pressure is calculated by adding atmospheric pressure to the gauge pressure. Standard atmospheric pressure is approximately 1.01325 bar, so for a gauge pressure of -0.2 bar, the absolute pressure would be 1.01325 bar - 0.2 bar, which equals approximately 0.81325 bar. Therefore, the absolute pressure is about 0.813 bar.
Bar is a unit used to measure pressure, one bar is the normal atmospheric pressure of the on the surface of the earth, and ten bar is when the pressure is ten times the normal atmospheric pressure on the surface of the earth.
If you mean in the ocean, approximately every 10 meters pressure increases by 1 bar. Assuming you want absolute pressure, at the surface you already have a pressure of approximately 1 bar - the atmospheric pressure. You can base your calculations on that.
Cubic feet per minute (CFM) is a measure of airflow, while bar is a unit of pressure. To convert bar to CFM, you need to consider the specific application and the characteristics of the system involved, such as temperature and the type of gas. There's no direct conversion between these two units without additional context.
A Liter is a measure of volume; a bar is a measure of pressure - your question is like asking how much does a foot weigh.
Depends on the pressure. What bar do you intend to run at?
Type your answer here... i have a tank with 5.18m^3 volume . iwant to know how many liters of air with 8 bar in there?
this pump is senterfugal and content from 3 stage . stage one is normal pressure and stage 2 is high pressure max pressure is 30 bar and volume is 3000 liter per minute at 10 bar )stage 1
You cannot. Bar is a measure of pressure whereas m3 per minute is a measure of flow rate. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
AUX + 2 + 833 + # and soundbar should work
Absolute pressure is calculated by adding atmospheric pressure to the gauge pressure. Standard atmospheric pressure is approximately 1.01325 bar, so for a gauge pressure of -0.2 bar, the absolute pressure would be 1.01325 bar - 0.2 bar, which equals approximately 0.81325 bar. Therefore, the absolute pressure is about 0.813 bar.
The main difference between a pressure cooker with a 15 bar and a pressure cooker with a 20 bar rating is the maximum pressure they can reach. A 20 bar pressure cooker can reach higher pressure levels than a 15 bar pressure cooker, which can affect cooking times and the tenderness of food.
The pressure at standard temperature and pressure (STP) is 1 bar.
The main difference between an espresso machine with 15 bar pressure and one with 20 bar pressure is the amount of pressure used to extract the coffee. A machine with 20 bar pressure can potentially produce a more intense and flavorful espresso compared to one with 15 bar pressure.
Volume of 10000 Litres is suprisingly enough exactly, not more or less than: 10,000 liter or 10 cubic metresUse pV=nRT! Make sure you convert the pressure into Pascals.
Pressure is the physical quantity measured in bar.