0
What else can I help you with?
How to convert dollars per SM to dollars per SF?
The answer depends on what other exchange rates you have.
How much does three quarter inch glass weigh per square foot?
10 lbs per sf.
How do you calculate parking ratio per 1000 sf?
To calculate the parking ratio per 1,000 square feet (sf), divide the total number of parking spaces by the total square footage of the building or area in question, then multiply the result by 1,000. The formula is: (Number of Parking Spaces / Total Square Footage) × 1,000. This gives you the number of parking spaces available for every 1,000 square feet of space. For example, if there are 50 parking spaces for a 20,000 sf building, the ratio would be (50 / 20,000) × 1,000 = 2.5 spaces per 1,000 sf.
Price for ipc wall protection per square foot labor installation?
Add about 6 sf for labor
Commercial Metal stud framing price per sq foot?
Depends on your area (region) You can estimate about $2.73 sf
Price per sf duraceramic installed with grout?
Around $12 - $15 sf
How much costs per month if 18 per sf for 1500sf?
$27,000.00
What is the average kwh per square feet for office buildings?
$.14kWh/sf - $.18+kWh/sf depending on several factors.
What is the average cost of labor per sf of ceiling grid in VA?
$1000,000,000,000,000,000,000 per month
What does warehouse space cost per square foot in Memphis TN?
$.60 per SF
How to convert dollars per SM to dollars per SF?
The answer depends on what other exchange rates you have.
What is the going rate for laminate flooring in NH?
You should be able to find laminate flooring anywhere from $0.75 per sf to $4.00 per sf depending on the thickness, brand and whether the underlayment is attached.
What is average stucco price for stucco in phx AZ?
The range should start at a minimum of $400for anything up to about 50 SF, plus about $5 per SF for the next 300 SF. As the amount of repairs increases, the SF cost should stabilize or decrease a little. New stucco should cost approximately $3.90 to $6.00 per SF."Small repair jobs cost more (per sq ft) than large jobs.Most contractors have a minimum charge and/or a charge for a service call.
How do you calculate n in freundlich isotherm?
The Freundlich isotherm is typically represented as (\sf q = k \times C^{1/n}), where (\sf q) is the amount of solute adsorbed per unit mass of adsorbent, (\sf k) is the Freundlich constant, (\sf C) is the equilibrium concentration of solute in solution, and (\sf n) is the Freundlich exponent. To calculate (\sf n), you would need to plot (\sf log(q)) versus (\sf log(C)) and the slope of the linear portion of the curve will give you the value of (\sf n).
What is the Cost to build apartments in Georgia?
75-100 dollars per SF
How much does three quarter inch glass weigh per square foot?
10 lbs per sf.
What is the weight per square foot of 2.3 polyisocyanurate?
Polyiso weighs roughly 4 ounces per sf per inch.
