060 as a whole number? .060? 0.60?
472-293 = 179
472 − 150 = 322Therefore, 472 is the answer.
.060 acres = 2,613.6 square feet.
All multiples of 472, which is an infinite number.
4.310
Bore a 454, .060 over.
The bore adds about 10 cu. inches to make it a 337
If my math is correct , just over 362 cubic inches ( 4 inch bore x 3.5 inch stroke , bored .060 inches )
.040 is the best, But you can go .060 over but it may try to run hot in the summer time.No more then .060 cause after that the cylinder walls are to then.
.060"
283 bored .060 over should b abour 292 cubics A standard bore 283 was 3.875", so 60 over would be 3.935.
They do not make .050 over pistions. But they do make .030,.040, and .060 pistions.
I've heard of going .060" over, but most builders feel .030" over is the limit.
If my math is correct : using a 4 inch bore and a 3.48 inch stroke , with the cylinders bored .060 , just over ( 360 cubic inches )
It would probably be close to a 340 as the 340 is the same engine block as the 318. The stock 318ci has a 3.910 in. bore with a 3.31 in. stroke the very same stroke as a 340ci. The stock 340ci has a 4.04 in. bore. The .060 in. over bore would result in a 328ci engine. The formula for this is, 1/2 bore x 1/2 bore x 3.14 x stroke x number of cylinders.
ive heard you can go 60 over (.060)