0
What else can I help you with?
What is the sq ft of a wall that is 138 feet long and 1 foot high?
The area of that wall would be 138 square feet.
How many yards in a wall that is 10 feet high and 27 feet long?
9 yrds
What is 50 feet high 26 feet wide and 1500 miles long?
great wall of china
What is the area of a rectangular wall with dimensions 13 feet by 9 feet?
To find the area of a rectangular wall, you multiply its length by its width. In this case, the area is 13 feet multiplied by 9 feet, which equals 117 square feet. Therefore, the area of the wall is 117 square feet.
How many blocks to build a wall 4ft height x 8ft long?
To determine how many blocks are needed for a wall that is 4 feet high and 8 feet long, first calculate the area of the wall: 4 ft x 8 ft = 32 square feet. If standard concrete blocks are used, which typically measure 16 inches long by 8 inches high (1.33 ft x 0.67 ft), each block covers about 0.89 square feet. Dividing the total area (32 sq ft) by the area of one block (0.89 sq ft) gives approximately 36 blocks required, not accounting for mortar or waste.
What is the sq ft of a wall that is 138 feet long and 1 foot high?
The area of that wall would be 138 square feet.
An outside wall is 18 feet tall and 26 feet long what is the area of the wall?
468 ft
How many yards in a wall that is 10 feet high and 27 feet long?
9 yrds
What is the size of wailing wall?
the exposed section is 187 feet long and 62 feet high.
What is 50 feet high 26 feet wide and 1500 miles long?
great wall of china
How many square feet in a wall that is 231 feet long and 9 feet high?
231ft x 9ft = 2079ft2
What would it cost in labor to have a contractor build a partition wall in a hall way 3 12 feet high and 7 feet long?
Depends on the contractor. Call several in your area for an estimate.
How much does it cost to put up an interior wall?
It will cost about $550 to remove a non load bearing wall by a contractor. That amount is for a wall that is about 10 feet long and 8 feet high.
How many blocks to build a wall 4ft height x 8ft long?
To determine how many blocks are needed for a wall that is 4 feet high and 8 feet long, first calculate the area of the wall: 4 ft x 8 ft = 32 square feet. If standard concrete blocks are used, which typically measure 16 inches long by 8 inches high (1.33 ft x 0.67 ft), each block covers about 0.89 square feet. Dividing the total area (32 sq ft) by the area of one block (0.89 sq ft) gives approximately 36 blocks required, not accounting for mortar or waste.
How high was the great wall?
Approximately 39 ft at its tallest point and over 2150 miles long.
What is the size of the Vietnam Wall?
Each leg of the wall is 246.75 feet long.
The square foot of a wall that's 8 feet and 20 feet long?
8' x 20' = 160 sq' that is the formula for area.
