Class 9 fill dirt refers to a specific type of soil used in construction and landscaping, primarily for filling in low areas or creating a level base. It typically consists of a mixture of soil types, including clay, silt, and sand, which may contain some organic material but is generally free of debris and large rocks. This fill dirt is compactable and provides good drainage, making it suitable for various projects, such as foundations, backfilling, and grading. It is classified based on its physical properties and suitability for construction purposes.
3ft x 3ft x 1ft = 9 cubic feet of dirt will be needed.
7.48051945
12 cubic feet. 8 x 2 x .75
This is a nonsense question. Tons of dirt can be converted to cubic feet, depending on moisture and dirt type, but not to sf or square feet.
2720'³
3ft x 3ft x 1ft = 9 cubic feet of dirt will be needed.
With a bunch of dirt! With a bunch of dirt!
Depends on the density of the dirt... howver, I can tell you that the volume of that area is 495 cubic feet.
Clean fill dirt is soil that is free from contaminants such as organic matter, chemicals, or other pollutants. It is commonly used in construction projects to fill in holes or level surfaces. Clean fill dirt is essential for maintaining the integrity of the structure being built.
The area of the garden is 9 x 4= 36 ft2, so the volume of dirt you need would be length x width x depth. Since you didn't say what the depth was, the number of bags of dirt, which is equal to the volume you want to fill in cubic feet is just 36 x the depth you want to fill with dirt. If you only want to have about a 2 inch layer of dirt all over your garden, you need 36 ft2 x 1/6 ft = 6 cubic feet = 6 bags of dirt. Good luck!
Fill dirt is dirt that someone has removed from one area and needs to dump somewhere else. Often this is dirt that has been removed so that a swimming pool can be installed or excess dirt from clearing land for construction. There is clean fill dirt, which does not have trash, plant material, rocks or chemical additions and this is preferred for reuse in yards for planting.
300 cubic feet of dirt
You need 13 yrd's of fill
To fill a pond with dirt effectively, first remove any water and debris from the pond. Then, gradually add layers of dirt, compacting each layer with a roller or compactor to prevent settling. Make sure to fill the pond evenly and compact the dirt thoroughly to create a stable base.
There is no dirt in a hole because a hole is defined by the absence of material, in this case dirt. If you were to fill the hole with dirt, it would require 24 cubic feet of dirt to completely fill it.
post a lisitng on cleanfill.net in the need fill section its free
You can get fill dirt from landscaping supply companies, construction sites, or excavation companies. The cost of a dump truck load of fill dirt can vary depending on location, quality of the dirt, and delivery fees, but it typically ranges from $150 to $500. It's best to contact local suppliers for specific pricing and delivery options.