it converts sine/cosine sensor signals with a selectable resolution and hysteresis into angle position data.
Angle of contact is the angle between a tangent to the liquid surface at the interface and the solid surface inside the liquid. For concave surfaces, it is acute . For convex surface , it is obtuse.
There are many ways to measure a contact angle, but the simplest way is to use a goniometer. The image of the droplet is taken with a high resolution camera; the angle can then be measured using a protractor.
It is a right angle
The angle of rotation of the balance in which the roller pin is in contact with the pallet forks.
Michael R. Sasges has written: 'The effect of gravity on fluid configuration and contact angle hysteresis'
it converts sine/cosine sensor signals with a selectable resolution and hysteresis into angle position data.
Generally th e current drawn by the transformer in no load condition is being utilised by the iron losses and the angle b/w voltage and current is known as hystresis angle.
The contact angle is the angle in which the liquid interface meets the solid surface. The contact angle should be as small as possible to have an effective penetrant material.
what is hysteresis losses
It is a special type of synchronous motor.It works on the principle of hysteresis and the torque is produced due to hysteresis
can Hysteresis motor use like alternator
max hysteresis = max(O_decreasing - O_increasing) / (O_max - O_min)
Contact angle is the angle that a drop of liquid makes as it meets the surface or interface of another phase, usually a solid
Hysteresis - 2012 was released on: USA: 1 October 2012
Give a brief idea of principle of hysteresis motor,application.
the leading or lagging between the stress and strain is called hysteresis loop