baud rate is the rate of symbol changes...symbol can be of 1 bit, 2 bit , 3 bit etc.... Where as frequency is the inverse of rate of lowest unit in a digital transimission...
Both are units of data transmission rates through a communication medium. Baud rate signifies symbol rate. How many symbol changes are transmitted per second. Symbols can contain one bit or more (e.g. 3-bit symbols). Bit is smallest unit in digital transmission or digital communication. Bit has only two states but symbols can have more than 2 states. So symbol may may represent more than one binary bit and so baud rate may or may not be equal to bit rate. Also see http://en.wikipedia.org/wiki/Bit_rate http://en.wikipedia.org/wiki/Baud - Neeraj Sharma
Baud rate refers to the number of signal changes or symbols transmitted per second in a communication channel. In the case of a 4-level binary signal, each symbol can represent 2 bits of information (since 4 levels correspond to (2^2)). Therefore, the baud rate can be calculated by dividing the bit rate by the number of bits per symbol. For example, if the bit rate is 1000 bits per second, the baud rate would be 500 baud, as there are 2 bits per symbol.
There is no difference between them they are same rate constant is another name of specific rate constant
mortality rate - death rate
The rate that tea cools will change with the temperature difference between the tea and the ambient temperature. The larger the difference between the two, the faster the rate will be. As the tea cools closer to room temp, the rate of cooling will decrease.
baud rate generator is a frequency divider
Baud rate is the measure of how many times per second a signal makes a transition between two different states. The state of the signal can be a measurement of frequency, voltages, or phase angles to name a few. The Baud defines the number of signal events that occur in a transmitted signal.
No, the frequency of a square wave is related to the number of times it switches between high and low states in a given time period. Baud rate, on the other hand, refers to the number of signal changes per second in a communication channel, which may involve encoding schemes where multiple bits are represented by each signal change. The two are related but not always equal.
Basically the baud rate can never be greater than the bit rate. Baud rate can only be equal or less than the bit rate. However, there are instances that baud rate maybe greater than the bit rate. In Return-to-zero or Manchester encoding, where there are two signaling elements, the baud rate is twice the bit rate and therefore requires more bandwidth.
baud rate = symbol rate= modulation rate all the same thing
whats the baud rate of the modem of the computer
It is impossible to answer that question. On the other hand if you assume this: - Baud rate = symbol rate - Bit rate = bits per second The following formula is valid: Baud rate = bit rate / 10 If 1024 QAM is used.
Baud rate is defined as the number of bits transmitted per sec.
Baud rate refers to the rate at which symbols are transmitted over a communication channel. In the case of 256 QAM (Quadrature Amplitude Modulation), each symbol represents 8 bits of data (since 256 = 2^8). Therefore, to calculate the baud rate for a data rate of 48,000 bps, you would divide the data rate by the number of bits per symbol: 48,000 bps ÷ 8 bits/symbol = 6,000 baud. Thus, the baud rate is 6,000 baud.
Compare the IC data sheet EUSART and USART sections of the two PICs. Especially the register bits definitions and Baud rate setting.
Because it is the top operating speed for that IC
Yes, baud rate can be greater than bit rate in certain situations, particularly when multiple bits are transmitted per symbol. Baud rate refers to the number of signal changes or symbols per second, while bit rate measures the number of bits transmitted per second. For example, if a modulation scheme encodes multiple bits into a single symbol, the baud rate can exceed the bit rate. However, in most scenarios, especially in simple binary communication, baud rate and bit rate are often equal.