0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a Transitive Property of Parallel Lines?
If L1 is parallel to L2 and L2 is parallel to L3 then L1 is parallel to L3.
How many square feet in a qubic foot?
Square feet have dimensions L2 while cubic feet have dimensions L3 so they are not interchangeable.
Is a triangle an irregular polygon?
It depends on the length of the sides and the degree of the angles. If L1=L2=L3, and <a=<b=<c, then it is a regular polygon. Can you read algebraic expressions? If you can't, get someone who can. <br>
8085 program to check whether no is prime or not?
Lda 8500 mov c,a cpi 02h jz l1 cpi 01h jz l1 mvi e,01h mvi h,00 mvi b,02h l4: mvi d,00 mov a,c l2: sub b inr d cmp b jnc l2 cmp e jz l3 jnc l3 inr h l3:inr b dcr d jnz l4 mov a,h cmp e jz l5 jnc l5 mov a,01 sta 8501 hlt l5: mov a,0e sta 8501 hlt
What is the l3 and r3 in the PC?
WHAT IS L3 AND R3
How do l1 l2 and l3 works?
How do L1, L2, and L3 work
What is a Transitive Property of Parallel Lines?
If L1 is parallel to L2 and L2 is parallel to L3 then L1 is parallel to L3.
If you have 3 light bulbs explain how you can determine they are connected in parallel circuits by unscrewing one bulb?
Unscrewing any light bulb in series will result in the others turning off. If they are in parallel, unscrewing one will have no effect. For example, say we have lights bulbs L1, L2, and L3, where L1 and L2 are in parallel and L3 is in series with L1 and L2. If L1 is unscrewed: L2 and L3 will stay lit. If L2 is unscrewed: L1 and L3 will stay lit. If L3 is unscrewed: L1 and L2 will turn off.
What voltage would be measured from any phase to ground on a 480 volt 3 phase wye system?
The voltage measured from any phase to ground on a 480 volt 3-phase wye system would be approximately 277 volts. This is because in a wye configuration, the line-to-neutral voltage is √3 times smaller than the line-to-line voltage. Given a line-to-line voltage of 480 volts, the line-to-neutral voltage would be 480 / √3 ≈ 277 volts.
Is gomphosis a joint between L2 and L3?
Gomphosis is a type of joint that connects teeth to the jawbone, not between vertebrae like L2 and L3. The joint between L2 and L3 is called an intervertebral joint or a symphysis joint, where the fibrocartilaginous disc sits between the two vertebrae.
What is L1 and L2 support in sap fico consultant for support?
Hi, L1, L2, L3 & L4 are different level of support services and each level of support service has a time frame, within which it should be resolved. The L1, L2, L3 & L4 are decided by customer ideally based on the type of complexity and / or priority, which are already agreed in the contract. L1- Help desk support L2- Technical support L3- Configuration changes or customization L4- SAP AG Regards, Sachin
What cache does a itanium utilize?
L1, L2, and L3
Is 277 volt one hot wire?
No, 277 volts is the line to neutral of a 480 volt wye three phase system. L1- N, L2 - N and L3 - N will give you 277 volts. L1 to L2. L2 to L3 and L3 to L1 will give you 480 volts.
What is a perpendicular with paralles lines?
If there are given two parallel line L1 and L2, and a third line L3 that is perpendicular to L1, then the line L3 must also be perpendicular to L2.
Where is l2-3 located in the back?
The L2-L3 vertebrae are located in the lower back, specifically in the lumbar region. They are the second and third vertebrae from the top of the lumbar spine, just below the L1-L2 vertebrae and above the L3-L4 vertebrae.
Do current processors have L1 and L2 caches?
l1 is in motherboards l2 is on processor newer processor has l3 too
How do you know which leads are L1 L2 L3 on a 3 phase 2 speed motor?
You can identify the leads by using a multimeter to measure the resistance between each lead. The resistance between L1 and L2 should be higher than between L1 and L3 and L2 and L3. You can also consult the motor's wiring diagram for guidance.
